Apophis3
Members-
Posts
779 -
Joined
-
Days Won
1
Apophis3 last won the day on February 23 2018
Apophis3 had the most liked content!
Reputation
12 Good-
They do it because like other makers, they bought the chinese Omron switches in bulk, and they are betting on the numbers that there won't be issues, and simply replace and replace until you get a working one. The guys doing the refurbs are prolly taking used mice and fixing the broken wheels and not replacing the switches. I have a refurbed Ironclaw Wireless to replace my perfectly working one that had developed a broken wheel. I never used it. I have a G903 Hero that I bought while I waited for the RMA to happen. (which took 2 weeks to get the reply) EDIT: decided to test it out, at least it doesn't double-click (wired at least) The skates also have more drag than the G903 Hero. And I used to think the Ironclaw wasn't that heavy, until I started using it after 2 months of the G903. :D I have to depress the click buttons more to register vs the G903.
-
I use a K63 Wireless and a G903 Hero wireless, so they can work. I suggest you take both out, and then connect the K57 dongle, wait a couple of secs, then do the G502 dongle. This way when the 2nd one initializes, it can select a better frequency.
-
M65 RGB Elite Left Click Failure - and I am DONE with it
Apophis3 replied to jmer88's topic in Keyboards and Mice
Welcome to chinese Omron switch hell. This affects many brands. -
Or the Zowie test caps at 1000 Hz.
-
Did you try doing a Repair install?
-
Wired vs Wireless : with the advent of 1000ns polling or better on wireless, latency has become a non-issue. It's now more of a matter of convenience and whether the wire drag annoys you. As for which Corsair Mouse: I like the setup on the Nightsword. The 3-button setup on the thumb area looks efficient, and has a nice aim button option. (This config is seen on other makers)
-
Never going to happen.
-
k95 rgb platinum how long until someone will reply to ticket?
Apophis3 replied to zahidm1702's topic in Keyboards and Mice
Took them 11 days for my ticket. -
Ironclaw RGB Wireless Broken wheel
Apophis3 replied to kardebadas's topic in Gaming Peripherals & Audio Troubleshooting
Nice, if/when my replacement breaks I'll consider doing the same- 95 replies
-
- broken
- ironclaw rgb
-
(and 2 more)
Tagged with:
-
Then it appears you may have a faulty dongle, and needs replacement.
-
Put the dongle in a USB2.0 port if you have one, or just another port that is direct from the PC. Don't use any hubs. See if it gets identified. If not, force a firmware update so the dongle gets redone.
-
The trick is getting it aligned with the mouse. It blinks white when it gets power.