Jump to content
Corsair Logo Corsair Logo
Corsair Community
CORSAIR COMMUNITY Survey, we want to hear your feedback!

Gronar

Members
 View Profile  See their activity

  • Posts

    127

  • Joined

 Content Type 

Everything posted by Gronar

  1. Gronar
    Mine's been running fine since the day the update released.
  2. Gronar
    Ran the system a whole day at 3066 and it was stable even through a marathon gaming session last night so this morning I pushed it up to 3133. Tested with playing a game and had no problems. Will keep it at this speed for today to confirm stability then push it to 3200 tomorrow.
  3. Gronar
    With your motherboard and CPU you should be running pairs, not an odd amount of sticks. Dual channel RAM is used in pairs. Also, mixing different RAM kits (i.e. not buying a 2 stick or 4 stick kit together) is very iffy, spotty to get working correctly. And to top it all off AM4 boards are really finicky at trying to run 4 sticks of RAM.
  4. Gronar
    Thanks for the link, did some research there and spent some time with DRAM calculator for Ryzen after pulling all the RAM info with Typhoon. Currently I've used all the settings the calculator gave me and slowly pushed it up to 3000 and things are running good so far, no blue screens or lock ups. I'll probably push it even further over the weekend to see just how far I can go and keep it running stable.
  5. Gronar
    Personally I think the issue is Asus, I won't be buying their motherboards again in the future :laughing:
  6. Gronar
    I can confirm this did work for me.
  7. Gronar
    Destiny 2 is not on the SDK, can confirm.
  8. Gronar
    Spoke too soon. Ran stable all day just web browsing. Played Destiny a while and the game kept crashing, then the system. Backed off the speed to 2800 and stable while gaming again.
  9. Gronar
    Well here's some good news A Computer Guy: BIOS update for my board last night, I'm now running all 4 of my Dominator Plat RGB with DOCP active, 3133MHz and appears to be stable. 3200 hard locked the machine when I ran a game. That's the best speed I've seen though, better than the previous 3000 I was getting.
  10. Gronar
    Check your Nvidia drivers.
  11. Gronar
    I too have not used the ones that came with both of my copro's so I'm not sure if they are needed or not. I know that I've seen some profiles drop my ML fan to zero RPM but don't think the LL's will do it.
  12. Gronar
    You need to setup a custom profile with one of the temperature thermistor's that came with the CoPro I believe.
  13. Gronar
    Oh, still have the issue if I check for an update on my H100i Platinum AIO I get "the firmware update is not available or failed to load for H100i PLATINUM".
  14. Gronar
    Update rolled back my Nvidia drivers. I had to reinstall the latest GPU drivers from 5/27. Besides that it seems to be working OK, kept my fan profiles.
  15. Gronar
    You can try what I did, get a cheap internal powered USB hub. Got one for $20 at Fry's that you connect it to the motherboard USB header, a SATA power connection and then I have both my CoPro's and my AIO plugged into it. No more flicker.
  16. Gronar
    Awesome info dude! My crypto mining machine has an ASRock board in it and I'm seriously considering going back to one for this 2600X gaming rig when the X570's are released.
  17. Gronar
    I think this is hardware, I had this issue also. To resolve it I ran the USB cable from the pump out the back of the case and into the motherboard USB ports on the rear. No flickering after that. Then I got an internal powered USB hub that I connected to the motherboard and now have both my CoPro's and AIO hooked up to it, again no flickering.
  18. Gronar
    My EDC was always in the 90's or higher when running Ryzen Master. I uninstalled it after it grabbed control of things that could no longer be changed in BIOS due to it changing values every time windows booted up.
  19. Gronar
    I can run two sticks at 3400 with no issues at all, haven't tried to push it further than that yet. Right now though I've gone to quantity over speed, running the full 32GB.
  20. Gronar
    I haven't used my Void Pro's for gaming yet but I checked them and they work fine.
  21. Gronar
    Pretty much what happened to me too after getting the BIOS update I wanted. I could run the 4 sticks at 3000 before that, now I'm reduced to 2800. Going to be replacing this TUF board soon I hope.
  22. Gronar
    I upgraded to 1903 yesterday and have rebooted multiple times with zero issues. iCUE v3.16.56.
  23. Gronar
    Try Windows safe mode with networking.
  24. Gronar
    I have the CMT32GX4M4Z3200C16 and it's Hynix.
  25. Gronar
    Just to add to this my CPU usage by the service was very low (2-3%) before the Win 10 1903 update. After it jumped up to over 10%. I did as suggested here and disabled software control on my Dominator RGB and it dropped back to pre patch levels.
×
×
  • Create New...