Killswitchin

It would be nice if they continued support for this product. It has really grate potential but corsair seemed to have dropped it like a bad habit.

When it comes to odd fans it gets a little tricky with Corsair. As you are aware, you can drive 6 fans with the one controller, so you have one fan that needs PWM and RGB control . You could always use a motherboard header to control the fan speed (either with the motherboard software or in BIOS) or use a fan splitter and connect that to the controller but those two fans will always run around the same speeds and you will only see it as one fan in ICue. You can also just get another controller like the Commander Core XT and hook the fan PWM and RGB to that (This will just show as another controller but you will have full control from ICue) You will also need another USB 2.0 header and SATA power. If you have a Lighting Node Pro from a fan 3 pack of the QL120's and all the other fans are connected to the AIO, you can get a RGB controller unit from the Corsair website (note that it will require SATA power) Then power the RGB from the 1 lighting channel on the LNP and connect the PWM from the motherboard or fan splitter.

More features and support for icue nexus. I would love to add battery widgets for my mouse and headset. It's there when it uses the default screens but you can't add them with a custom screen. Also the option to switch the widgets from words to something like percent values.

Can confirm these steps work if followed correctly. Thank you Corsair, that was bugging me forever lol. Now how about battery widgets for ICue Nexus?

Would it be possible to add a battery widget to ICue Nexus? The Voice prompt in my Corsair Virtuoso headset is great, but I have no external visual of my Corsair Dark Core battery status (Unless I have ICue up on my second screen or checking the battery level in the system tray) Alt tabbing to check it is not a huge pain but the ease of scrolling threw the Nexus screens is nice and it be convenient to see the battery status at a glance. Also is there a way to display percentages of the battery level instead of relying on "High" "Medium" etc....? I got this Nexus thinking it would just be a nice toy to check out once and while but I am really liking this product and want to see develop. In the future I would like to see a refresh of this product with a bigger screen and less bezel and better viewing angles.

Hey everyone, I just noticed today that one of the LED's on one of my QL120's are not working correctly. I have rebooted the computer, tried to change the LED colour and it's still not going to the correct colour. I'm going to assume the LED is defective at this point. Is there any hope of fixing it? or is it RMA if possible?

Yes I'm running the latest version.

Thanks for the info. I looked it up in MSI Afterburner and it registers 2 fans, so that makes sense on why it shows like that in ICUE.

I would like to water cool mine too but from what I understand they wont be offering support for the suprim series :[pouts:

Thank you for the update. I uninstalled ICUE 3.X and installed 4.10. CUP usage seems to be around the same now as it was with 3.X. I noticed going from a 2 fan GPU to a 3 fan GPU this year, the number of fans do not update in ICUE(msi surprimx 3080). The 2 fans it does display seem to work fine. I was just wondering if this was due to a certain way it was displayed? Or is that something that can be looked into? I also have this slightly cosmetic issue with home screen showing some products with their correct name but with a (1) I tried to edit the config file but closing and relaunching ICUE just overwrites any changes, but I can live with it for now. I have an MSI x570 ACE and I can see a section for it but still trying to figure out how control the RGB. Liking the new ICUE, keep up the good work.:sunglasse

Has there been any progress with the high CPU usage and the MSI plugin?

I like the idea of new Icue but the high CPU usage from the MSI plugin will prevent me from using this. Icue 3x works fine for me and I understand that the plugin issue is being investigated so I will continue to use it until this plugin issue can be resolved. I want to switch over to 4 because I have waited so long for Icue to support MSI RGB and would love to have this option.

the hardware that comes in the box is for RGB only, to control the fans you could have the 3 in the box connect up to your motherboards fan headers or you could go with a commander pro or the controller in the diagram. I would recommend that you let your AIO control the fans that come with it

Hi, I did a fresh install of windows and updated to the current version of ICUE but it will not pick up my commander pro. It will show everything else, I have unplugged and re plugged cables, insured it is receiving power, the flans light up doing their rainbow puke (LL120) I have tried the previous version, insured all motherboard software is up to date, uninstalled and reinstalled ICUE a few times and restarted the service and I am still not able to get it to pop up. It was just working yesterday. Anyone have any thoughts?:confused: