CJShiz Posted November 7, 2017 Share Posted November 7, 2017 Im getting the h100i v2 and plan on replacing the radiator fans with the ll120 fans. Now I know I need the node light pro and led fan hub to sync with my other ll120 fans but im just a little confused as to if I should plug my ll120 fans on the aio radiator into the led hub or into the aio unit itself. I want all my fans to be in sync but I also want my radiator fans to cool at the proper speeds. Im new to building so any help would be greatly appreciated!! Thanks!! Link to comment Share on other sites More sharing options...
Mapantz Posted November 9, 2017 Share Posted November 9, 2017 Im getting the h100i v2 and plan on replacing the radiator fans with the ll120 fans. Now I know I need the node light pro and led fan hub to sync with my other ll120 fans but im just a little confused as to if I should plug my ll120 fans on the aio radiator into the led hub or into the aio unit itself. I want all my fans to be in sync but I also want my radiator fans to cool at the proper speeds. Im new to building so any help would be greatly appreciated!! Thanks!! Hi I installed an AIO cooler today, and I also bought two more ll120's (totalling five) to go on the 240mm radiator. I had the CPU_FAN and OPT_FAN headers available for mine, so I plugged the PWM plugs in to them, and the other plugs go in to the lighting hub for the LED's. The fans will spin up according to your CPU load. Link to comment Share on other sites More sharing options...
c-attack Posted November 10, 2017 Share Posted November 10, 2017 Im getting the h100i v2 and plan on replacing the radiator fans with the ll120 fans. Now I know I need the node light pro and led fan hub to sync with my other ll120 fans but im just a little confused as to if I should plug my ll120 fans on the aio radiator into the led hub or into the aio unit itself. I want all my fans to be in sync but I also want my radiator fans to cool at the proper speeds. Im new to building so any help would be greatly appreciated!! Thanks!! It will be both. There are two wires on the LL/HD fan series. One for power/control and the other for lighting. The lighting wire goes to the hub, which in turn goes to the LNP. The power source for the fan blade can come from anything -- motherboard, fan controller, or the pump fan controller. I would use the pump controller so you can regulate via coolant temperature. Link to comment Share on other sites More sharing options...
snapper69 Posted November 10, 2017 Share Posted November 10, 2017 Agreed, if you set your fans to the CPU temp (unless you can somehow put a delay in) they will speed up and down every time that your cpu temp goes up and down (pulsing), which can be VERY annoying. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.