Jump to content

snapper69

Members
  • Posts

    1,790
  • Joined

  • Days Won

    5

snapper69 last won the day on June 1 2018

snapper69 had the most liked content!

Reputation

32 Excellent
  1. I don't suppose that you have a Corsair Dark Core RGB SE Wireless/Wired Gaming Mouse with Qi Wireless Charging, do you? I had 2 of these mice, both with the same problem that you are having, in the end I bought an Ironclaw cordless mouse which works perfectly (most of the time).
  2. It seems to be a bit hit and miss whether you get a good one or not, I loved mine (both of them) but they both randomly moved the pointer to the top left and randomly disconnected. I charged them with a QI phone charger, which worked well, but the battery life was a letdown. If I could be sure of getting a good one (and if the battery life improved), I'd buy another today.
  3. If you bought it from Amazon, they are responsible for the first 12 months, under UK/European law, so take it up with them.
  4. I bought a Dark Core with QI charging and it would randomly disconnect and also randoly move the pointer to the top left corner of the screen. I had no problems with the QI charging, but the battery life was appalling, I charged it over night, used it for an hour in the morning, went to work without switching it off and when I came home, it was as dead as a Dodo. I really wanted to love this mouse, it was perfect for me, size, buttons, everything, so much so that I returned it for a replacement (thanks Amazon), but it was exactly the same, so I returned it for a refund and bought a Logitech G903. Not as nice and it registered double click about 70% of the time. I liked this mouse so much, that I keep looking at it and wondering if the problems have been solved, but Corsair are still saying "up to 24 hours battery life", which, in my not so humble opinion, is nothing to boast about.
  5. I have just installed a Gigabyte RTX 2080 gpu and iCue doesn't detect it. It detected my previous Gigabyte GTX 1070 card. As far as I'm aware I have the latest version of iCue and I downloaded and installed the latest Nvidia drivers on Saturday, when I installed the 2080.
  6. How about one of these NZXT AC-IUSBH-M1 Internal USB Hub? It's no good if you have no usb 2.0 headers on your motherboard, but if you have one it helps a lot.
  7. It's a while since I looked, but aren't there 4 holes in the bottom of the tray (like the one in the picture) that you can use to screw the HDD in place? Failing that, remove the bung and use screws and washers.
  8. I'm fairly sure that the coolant doesn't flow through the fins, so some slight damage shouldn't matter. You shouldn't need to run your fans that high, the fans on my 280mm rad run at 800 to 900 rpm. Of course it depends on the temperatures of your cpu and the cooler coolant. Check them in Link and try running the fans at a lower speed and see what difference that makes.
  9. DO NOT swap it with your supplier. You will need to contact Corsair, using the "Support Ticket System" link at the top of the page (you will need to register again for that) and tell them what you have posted here, along with a copy of your invoice for the cooler, plus any photos that you have. You will probably need to send any damaged parts to Corsair for them to examine. They deal with situations like this on a case by case basis.
  10. Be careful what you do, you may invalidate the warrantee.
  11. You could get hold of some kind of some coloured plastic or acetate and stick that over the led. I had a sound card with a couple of annoying red leds, so I took it's case off and covered them with masking tape, but they were hidden from sight.
  12. Another way around it is to buy a cooler that gets its power from a SATA cable, rather than a motherboard header (assuming that any of the modern coolers do). Just saying.
  13. My wife woul kill/divorce me if I swapped cases again, I already have a 750D, a 730T and a Thermaltake Level 10 GT boxed up in the spare bedroom. I'm not sure that I could justify/afford the 1000D.
  14. Try removing the side panels and applying pressure to various parts of the case. I had this problem and it turned out to be one of the locking clips for the 5.25 cage and something on the rear of the motherboard tray. I had the problem with the 5.25 cage clips on my 900D as well, a small blob of Blu-tac cured it for now.
  15. Looks nice, in my favourite colour too.
×
×
  • Create New...