badalice Posted August 26, 2019 Share Posted August 26, 2019 Till 2 days ago... everything was fine. Then I got a firmware update for my Lightning Node and iCUE update. And this is what I ended up with: I have 4 RGB strips connected to Lightning node pro link 2. The effect runs for around 2 minutes and then 3/4 freeze. So i have LEDS in order 1-2-3-4. When it freezes: 1 - works 2 - freeze 3 - freeze 4 - freeze When I unplug them and plug them in, only 1st one works. When I change to 2 strips or 6 or 5 or whatever still only 1st strip works. Restart doesn't help. Strips are stuck even during restart. My 6 x LL120 Fans on Link 1 are working fine... Now I wonder... anyone else have an issue like that? Maybe someone has an old firmware for Lightning node? Is there an option to go back to previous version at all? I really hope so, because we all spend a lot of money to have things like that and having an issue like that makes my blood boil. Thanks in advance for any response. PS. Reinstalling iCUE didnt help, i got into same situation just right after. Link to comment Share on other sites More sharing options...
badalice Posted August 26, 2019 Author Share Posted August 26, 2019 2019-08-27 00:48:51.2265 | 18 | REDKA-PC | 3.18.0.3 | PowerManagementWatcher | -> System.Management.ManagementException: Shutting down at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.SinkForEventQuery.Cancel() at System.Management.ManagementEventWatcher.Stop() at CorsairLink4.Common.Shared.PowerManagementWatcher.Dispose(Boolean disposing) Link to comment Share on other sites More sharing options...
DevBiker Posted August 27, 2019 Share Posted August 27, 2019 Have you tried rearranging them? Link to comment Share on other sites More sharing options...
badalice Posted August 27, 2019 Author Share Posted August 27, 2019 No, I didn't try, but I will and let You know the outcome. I still believe it's software related, especially that it was working just fine before updating. Link to comment Share on other sites More sharing options...
badalice Posted August 27, 2019 Author Share Posted August 27, 2019 Hi DevBiker, I've made my tests. I turned off the 1st strip. The 3 were working without any issues for few hours now. I connected then the 1st strip as 3rd strip. If You can imagine the 4th LED strip froze. Anyway I've contacted Support to get a replacement. The faulty strip has also 2 leds not working and 2 stuck at one colour. Thanks for suggesting me to swap them. Link to comment Share on other sites More sharing options...
DevBiker Posted August 28, 2019 Share Posted August 28, 2019 Glad that we got it figured out! It did sound like a bad strip. Link to comment Share on other sites More sharing options...
Recommended Posts