aep_seidhe Posted October 14, 2017 Share Posted October 14, 2017 Hi all, again with stupid question but now the confusing part is delivered by ... corsair and two pages: http://www.corsair.com/en-us/blog/2015/april/corsair-hydro-series-cpu-cooler-decoder-ring-and-case-compatibility-chart According to this one Carbide Air 240 should be able to take 280 cooler solution (there is Corsair Hydro Series H110i GT mentioned). ok I have "smaller" H115i ... then I check product site and we have this: http://www.corsair.com/en-us/carbide-series-air-240-arctic-white-high-airflow-micro-atx-and-mini-itx-pc-case where there is not mentioned H115I or H110i GT (and the max is H100i, H105) what is the answer ? will it fit or not. Note: I have everything - case (new) - too big gtx (will check if it fit) - cooling solution 2x140 steps to be done : buy mobo but not sure if I should stick to my old case (and follow ATX) or this fancy super looking Carbide Air 240 (with mATX) Note: I cannot check it by myself as it's used in server 24/7 solution. Please help me with the cooler information !:) Link to comment Share on other sites More sharing options...
Toasted Posted October 19, 2017 Share Posted October 19, 2017 It'll probably be best to put in a support with Corsair and see what they say. https://support.corsair.com/ Link to comment Share on other sites More sharing options...
c-attack Posted October 20, 2017 Share Posted October 20, 2017 I don't remember any 280mm Air 240 builds without serious customization. 240mm max in the front is about all you can do. Go ahead and contact Corsair anyway. That comparability list is a bit old, but it needs to get cleaned up. Link to comment Share on other sites More sharing options...
Corsair Employee Greybeard Posted October 23, 2017 Corsair Employee Share Posted October 23, 2017 240mm rad is largest rad you can fit in an Air240. Link to comment Share on other sites More sharing options...
luizvictor Posted April 3, 2018 Share Posted April 3, 2018 Is it possible to put 240mm rad in top or bottom with MATAX like H170m asus? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Caliente Posted April 3, 2018 Corsair Employee Share Posted April 3, 2018 Is it possible to put 240mm rad in top or bottom with MATAX like H170m asus? On bottom you'd have trouble going around the GPU. On top you may have some trouble with your memory clearance. You're better off mounting that cooler in the front. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.