mpoffo Posted June 5, 2020 Share Posted June 5, 2020 Hi, My monitor is 800mm wide. So a one 450mm strip is useless. Therefore I ordered an additional 250mm strip for the width. It would only be logical if I wanted to use the video mode correctly. But it does not work... Here is missing the possibility to choose a widescreen monitor with a strip combination in the width. Now I have only a 450mm strip (of course above and below:) ) installed. But it does not look very nice because the corners are dark. The stripes are not very bright anyway. If then still the corner does not shine, they are simply dark. 2x450mm in the width is no solution for me. This can't work in video mode because the transfer of the color information can't be correct. For the money and especially from this brand I expect a product that works well. I cannot imagine that it is technically not possible to use 250mm and 450mm in the width. Please excuse my english I am with you on this. We really need a more flexible way to configure strips that work with all modes including video mode. The dual monitor work around will not work or look correct with a Ultrawide screen for video mode. I really wanted to like this product but it is essentially collecting dust atm. I was hoping that they would have implemented something by now. I am not even sure they are planning anything. It would be good to at least know if this was something in the works. I don't want to use the NZXT solution and introduce another RGB ecosystem. Please Corsair, let us know if this is a possibility or not. Thanks Link to comment Share on other sites More sharing options...
BigD0g Posted June 20, 2020 Share Posted June 20, 2020 With the version 3. 30 has already done something but unfortunately only half. For me, only the graphics have been supplemented with an Ultra wide monitor. A configuration with a width of 250mm and 450mm is still not possible. This is now like two monitors setup only the graphics is different. If I miss something, please correct me. There are not many monitors that go over 900mm and they could choose the setup with two monitors. Link to comment Share on other sites More sharing options...
mgrenier25 Posted July 16, 2020 Share Posted July 16, 2020 Is a fix coming for this? after almost a year this product still can't be used for what I purchased it for. Very disappointed with this. Link to comment Share on other sites More sharing options...
coppertop1124 Posted July 25, 2020 Share Posted July 25, 2020 They've added an option for ultrawide, but unfortunately it only supports dual 450mm at top and bottom. Not sure what their idea of an ultrawide is, but there is no way my X34P will fit 2 450mms at top and bottom without overlapping them a bit. I bought a 250mm expansion back when the LS100 came out because a 450 and a 250 is the best set up for my screen. Until they add the ability to customize the strip layout, we're pretty much still at square one. Link to comment Share on other sites More sharing options...
t1971 Posted July 29, 2020 Share Posted July 29, 2020 I have mine on my TV set up this way. I hadnt actually noticed the issue until reading this thread, as i rarely connect PC to TV, and was using it more for ambient lighting. Surprised they sell expansion kits but dont support the setup. They've added an option for ultrawide, but unfortunately it only supports dual 450mm at top and bottom. Not sure what their idea of an ultrawide is, but there is no way my X34P will fit 2 450mms at top and bottom without overlapping them a bit. I bought a 250mm expansion back when the LS100 came out because a 450 and a 250 is the best set up for my screen. Until they add the ability to customize the strip layout, we're pretty much still at square one. My 43" TV has the setup with this issue. I couldnt fit their Ultrawide setup on back the TV comfortably, dont know how youd do it on one monitor. Link to comment Share on other sites More sharing options...
SoLKen Posted August 12, 2020 Share Posted August 12, 2020 Knock knock Corsair, add support for 450mm expansion kit, It's incredible that you can sell something that does not work... :nono: Link to comment Share on other sites More sharing options...
Blacksad Posted August 18, 2020 Share Posted August 18, 2020 Knock knock Corsair, add support for 450mm expansion kit, It's incredible that you can sell something that does not work... :nono: I use 4 450mm strips and 2 250m strips on my Ultrawide, and it works great. Are yours not lighting up? Link to comment Share on other sites More sharing options...
t1971 Posted August 20, 2020 Share Posted August 20, 2020 I use 4 450mm strips and 2 250m strips on my Ultrawide, and it works great. Are yours not lighting up? They do light up as as the strip setup is different in icue Video Lighting does not work right Link to comment Share on other sites More sharing options...
Blacksad Posted August 21, 2020 Share Posted August 21, 2020 They do light up as as the strip setup is different in icue Video Lighting does not work right Are you running it all on one lighting channel? Or do you mean it doesn't support small strips around the top and bottom. Link to comment Share on other sites More sharing options...
Zombie_Boy Posted August 31, 2020 Share Posted August 31, 2020 Hey folks, new user. Have an Ultrawide monitor, and I can get the starter kit and expansion pack to light up, but not in a way that makes sense... it should be start with the 250mm then, 2x 450mm across the top, 250mm down the side, then 2x 450mm across the bottom. but if i don't put the short sides at the start and end of the loop, the last two 450mm strips won't light up. WTF? Is there something I have to flip to make the blasted thing work properly? Link to comment Share on other sites More sharing options...
Ganjahouse Posted September 2, 2020 Share Posted September 2, 2020 For a 34 "ultrawide monitor, what is the correct setting to continue using video mode? I have tried 2 strips at the top of 450mm but it is too much and too much. Is it possible to use 6 strips of 250mm? Regards Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Calico Jack Posted September 2, 2020 Corsair Employee Share Posted September 2, 2020 Ok, so I'm reading through this and I feel some clarification is needed. You can't use more than 6 strips on one channel because of the LED limitation. Each channel can't power more than 4 long and 2 short strips. Each channel is essentially a different lighting controller, so you cant just run the extra strips on the other channel. The max number of LEDs is listed in your manual. The strips need to be plugged in in this specific order: Short, Long, Long, Short, Long, Long. The controller is expected to be in the bottom right corner of the monitor. Here is a video outlining the installation: There's a lot of feedback here, and I'm happy to forward it, but please remember that the video playback and how it operates is limited in numerous ways in order to achieve that immediate ambient color change. I can't promise anything, but I can certainly make sure that our teams are aware of the discussion around Ultrawide. I'm not going to be able to offer any specific changes, but if you have feedback regarding how it operates, you are certainly free to share and discuss on this thread. Link to comment Share on other sites More sharing options...
Ganjahouse Posted September 2, 2020 Share Posted September 2, 2020 And seeing the current market, wouldn't it be possible to get a special strip for ultrawide? Basically a 600 / 700mm long strip. Link to comment Share on other sites More sharing options...
Ganjahouse Posted September 3, 2020 Share Posted September 3, 2020 At the moment I'm using the basic kit on the 34" ultrawide screen and it doesn't look bad, but it's a shame that we can't add a short strip at the top and bottom as a supplement to correctly cover the length of the ultrawide. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted September 9, 2020 Corsair Employee Share Posted September 9, 2020 We're looking at further options to enhance the experience for ultrawide and other large display formats. Thanks for the feedback so far everyone. 1 Link to comment Share on other sites More sharing options...
davolon Posted September 17, 2020 Share Posted September 17, 2020 For my Screen, all I think would be needed is to make it possible to use Short Short Long Short Short Long or something like this. Or just some way to finetune "pixelposition" Or do those setups not work due to the amount of Led-Pixels needed to recreate the Video? Link to comment Share on other sites More sharing options...
Baio Posted October 13, 2020 Share Posted October 13, 2020 Any update on widwscreen support? I'd like to buy a LS100 for my 34UW but want to know if I'm buying something that is going to be old in a few weeks... Baio Link to comment Share on other sites More sharing options...
reketekui Posted October 13, 2020 Share Posted October 13, 2020 Nope with ultra wide/4k the ambient lighting doesn't works, it works before with my old monitor, but with my new ultrawide ambient fails Link to comment Share on other sites More sharing options...
Baio Posted October 13, 2020 Share Posted October 13, 2020 What do you mean with “fails”? Baio Link to comment Share on other sites More sharing options...
reketekui Posted October 13, 2020 Share Posted October 13, 2020 What do you mean with “fails”? Baio I mean that when i use it in "video ilumination" it doesn't works, still in black, in other modes works ok, when i used it whit my 1080p screen works like a charm, but i changed to a ultrawide screen and then stop works "video ilumination" effect. Link to comment Share on other sites More sharing options...
Baio Posted October 14, 2020 Share Posted October 14, 2020 I mean that when i use it in "video ilumination" it doesn't works, still in black, in other modes works ok, when i used it whit my 1080p screen works like a charm, but i changed to a ultrawide screen and then stop works "video ilumination" effect. Ok, this is not a problem for me, as I'd use the kit in static light. But does the starter kit actually cover the whole monitor? Do you use your monitor with its stand or with a wall mount? I'm afraid that using the stand (that means the monitor is far from the wall) resolves in an insufficient illumination. Thanks! Baio Link to comment Share on other sites More sharing options...
reketekui Posted October 14, 2020 Share Posted October 14, 2020 Ok, this is not a problem for me, as I'd use the kit in static light. But does the starter kit actually cover the whole monitor? Do you use your monitor with its stand or with a wall mount? I'm afraid that using the stand (that means the monitor is far from the wall) resolves in an insufficient illumination. Thanks! Baio The starter kits cover a standard monitor (24" was mine) but you must know the bright isn't too much powerful (sorry my bad english) Link to comment Share on other sites More sharing options...
Baio Posted October 18, 2020 Share Posted October 18, 2020 The starter kits cover a standard monitor (24" was mine) but you must know the bright isn't too much powerful (sorry my bad english) Thanks again dude! Baio Link to comment Share on other sites More sharing options...
Sorj Posted November 1, 2020 Share Posted November 1, 2020 Yeah I would love more customisation. I went and bought the starter and a bunch of expansions to get my 55" 4k tv set up plus mood lighting. I managed to get it by saying its 2 monitor's but it screwed me once I activated my other monitors (windows+P key ftw) by no longer understanding what's going on. I'd live my ultrawide and my 55"tv and 27" normal 16:9 aspect ratio monitors all to have the monitor effect running. Link to comment Share on other sites More sharing options...
coppertop1124 Posted November 1, 2020 Share Posted November 1, 2020 Ok, so I'm reading through this and I feel some clarification is needed. You can't use more than 6 strips on one channel because of the LED limitation. Each channel can't power more than 4 long and 2 short strips. Each channel is essentially a different lighting controller, so you cant just run the extra strips on the other channel. The max number of LEDs is listed in your manual. The strips need to be plugged in in this specific order: Short, Long, Long, Short, Long, Long. The controller is expected to be in the bottom right corner of the monitor. I dont believe there is a general misunderstanding of this. What most ultrawide users are asking for is the ability to specify what length of strips we're using instead of the rigid preset. For instance, the preset is short-long-long-short-long-long. My 34' ultrawide wont fit two long strips on the top and bottom without having to overlap the two strips in the middle. This results in a hot spot in the middle of the top and bottom with light overlap that looks bad with the lighting effect running. If I could specify 6 shorts all around the monitor, or 4 shorts and 2 long (short-short-long-short-short-long) it would work better. And using 6 short strips would not exceed the number of leds in the preset. Right now I have to use 1 long on top and bottom, but it leaves dark spots in the corners and only illuminates about 2/3 of the length along the top and bottom. But I dont have room to add another long strip. We just want some flexibility in how it is set up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now