zedriq Posted November 23, 2011 Share Posted November 23, 2011 i am owner of a force f40 ssd with 1.1 firmware. i tried to update under win 7 (ahci mode), but no drive is found (not under 1.1a, 2.0 and 2.4). i also tried ide mode, but same here. the drive was attached via sata0 port on my foxconn h67s mini-itx motherboard. has anyone a hint, what's the problem? :confused: greets, zed Link to comment Share on other sites More sharing options...
iamandrew Posted November 24, 2011 Share Posted November 24, 2011 i had issues with mine untill i re installed windows using the "F6 Intel driver" for AHCI isntead of using the default windows one. also check your using the chipset Sata ports instead of the extra ones, you can ususally tell if they are a differenet colour Link to comment Share on other sites More sharing options...
zedriq Posted November 24, 2011 Author Share Posted November 24, 2011 you mean that the intel ahci driver - which i already use - has to be loaded when installing windows? can't imagine why this should work, but it's an option. problem: i have to integrate it in win7 because of no available floppy. about the sata ports: i have a foxconn h67s where 3 sata ports are available onboard. two of them are blue coloured and one is black. look here: http://farm6.static.flickr.com/5150/5728123506_6f51d9be97.jpg which one are the chipset ones? think the blue coloured...were i installed the ssd already, but i will check the black one, too. will do so tomorrow and will report. thanks for your help. ;) Link to comment Share on other sites More sharing options...
NapsTer Posted November 25, 2011 Share Posted November 25, 2011 Go to properties and enter compatibility... at compatibility mode select windows 7.. also check Run As Admin... and it will work Link to comment Share on other sites More sharing options...
zedriq Posted November 26, 2011 Author Share Posted November 26, 2011 Go to properties and enter compatibility... at compatibility mode select windows 7.. also check Run As Admin... and it will work That's how i did it, when reading your thread here, but no luck with it. Will answer there seperately. ;) Link to comment Share on other sites More sharing options...
zedriq Posted November 26, 2011 Author Share Posted November 26, 2011 i have now checked it plugged as second drive to another system (with nForce chipset) and...it worked...without using the way which is shown here. :) Link to comment Share on other sites More sharing options...
Cooper Posted December 5, 2011 Share Posted December 5, 2011 I have the same issue, and no second system to move the drives to... Nothing worked. EDIT: I've managed to update the firmware by booting into my faithful Win7RescuePE. Everything worked from there... If it can be helpful, I was booting into a UEFI windows 7 x64 installation when things wouldn't work. Link to comment Share on other sites More sharing options...
rmilyard Posted August 15, 2012 Share Posted August 15, 2012 I am having this issue too. I have tried all in this thread and the link of the one posted with no luck. I have 2 Corsairs. Both 120's. One Force GT and one Force 3. Link to comment Share on other sites More sharing options...
Toasted Posted August 16, 2012 Share Posted August 16, 2012 Is the SSD plugged into the Intel SATA ports? AHCI Enabled in the BIOS? Have you tried running the updater as admin? Latest chipset drivers? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.