Paul S

ok cool, was looking for a wireless rgb keyboard too.

Yea this is true, what IC's do these sp120 fans use then?

At last someone figured it out! at the end of the day digital is digital, it doesnt care what signal it receives as long as the voltage is correct, now, ive had nothing but problems with my lighting node pro box with it flickering my fans all the time even after corsair sent a replacement, i have 6 sp120 fans, i will now connect these to my aorus x470 gaming7 wifis digital header, thanks for confirming this can be done fella. I have 2 sets of three sp120's 3 fans on two radiators, each set of three are wired together on the radiators, what i mean is i soldered 2 sets of 3 of the power plugs, if you do this only connect one of the threes speed sensor wires or the motherboards sensor reader will get confused and display 65535rpm its pointless connecting all 6 of the fans power plugs separately to the motherboard its a waste of sockets. so i did it in a 2x3 configuration as i say if you do this only connect the speed sensor from one of the three fans EDIT: The sp120 fans do not work as they're wired differently, however, check these out: These DO work flawlessly. 6 of em for 38 Quid. https://www.amazon.co.uk/gp/product/B07JQC1TKB/ref=ox_sc_act_title_1?smid=A3P5ROKL5A1OLE&psc=1

Do corsair sell any RGB wireless keyboards and mice?

Simple, the hardware is not equipped to store all the available lighting modes when the usb data transfer has been stopped with icue, if you want this "feature" use corsair link instead. the node pro hasnt seen a firmware update for a long time.

Yes but how long has this been on the market now and it still isnt working properly. dont you think people spending this much money on pc parts are getting pretty sick and tired of it all?

Not with the sp120 fans it doesnt

should is not good enough, i have a car for sale, a porsche 911, i want $15,000 for it, but it has no engine, interested?

What the flickering problem you mean? no chance of any software fix there, its a hardware fault, had to send my node pro box back for a replacement. I dont know who checks these things must be a blind man. i had all these stupid problems with my k70 rgb keyboard as well last year, i think im gonna knock corsair in the head and call it a day.

Why are all these problems still present with this very expensive rgb stuff, this shouldn't even be released on sale if its not working properly, theres always bloody something not working properly im sick and tired of it.

why is this software STILL reverting back to rainbow colours? why dont the colours get stored in the device itself instead of having it like a christmas tree every time i restart my machine, come on corsair! I want to set my whole machine to Aorus Orange, but at the moment it keeps going back to rainbow mode when the software isnt running, this is pretty poor.

Right is the lighting node pro box powered by 12,5 or 3v DC? (sata power plug) Reason i ask is was thinking of running a separte box with 4xled strips at the rear of my 60" tv

The lighting node pro uses a double pinned internal usb 2.0 header, now be careful here because of the way it is wired, it uses the power from two usb headers, one for power and signal, and second one for power only, running this box in your motherboards usb io shield ports gives a risk of blowing the port because of excess current draw, also note the usb internal cable is short for a reason, to stop power and signal loss, long usb cables will cause problems like flickering and cut outs. the maximum usb cable length should be no more than 30 cm, and to reliably use the box outside your chassis i would highly recommend using a quality usb splitter cable to make sure enough current is provided to the unit, basically a cable that splits the mini usb of the node pro to 2 x usb 3.0 plugs to plug into your io ports. Basically the same mini usb cable you use with external 5v hard drives https://www.com-solutions.co.uk/products/Cables/USB-Cables/StarTech-com/StarTech-com-1-ft-USB-Y-Cable-for-External-Hard-Dr?prodid=226011&gclid=EAIaIQobChMIruPoi4vD2wIVCrDtCh2Mww9-EAQYAiABEgL7hfD_BwE

Ok i love my k70 rgb and can manage to live with its flickering (just use 512 colours instead) however, the software is in desperate need of "snap to grid" when you are making colour profiles because without it its a nightmare to line everything up, also desperately needs a 512 colour wheel as well as 16 million one seperately, so we can see what colour pallette we can use instead of guessing all the time, im getting frustrated with this now come on corsair sort this out please.

Could you make me one for the game Walking Dead - survival instinct, cheers! something that suits the game theres a lot of blood! cheers m8 dont know if its possible but when i press left mouse button make red blood splashes on the keyboard?