At last someone figured it out! at the end of the day digital is digital, it doesnt care what signal it receives as long as the voltage is correct, now, ive had nothing but problems with my lighting node pro box with it flickering my fans all the time even after corsair sent a replacement, i have 6 sp120 fans, i will now connect these to my aorus x470 gaming7 wifis digital header, thanks for confirming this can be done fella.
I have 2 sets of three sp120's 3 fans on two radiators, each set of three are wired together on the radiators, what i mean is i soldered 2 sets of 3 of the power plugs, if you do this only connect one of the threes speed sensor wires or the motherboards sensor reader will get confused and display 65535rpm
its pointless connecting all 6 of the fans power plugs separately to the motherboard its a waste of sockets. so i did it in a 2x3 configuration
as i say if you do this only connect the speed sensor from one of the three fans
The sp120 fans do not work as they're wired differently, however, check these out:
These DO work flawlessly.
6 of em for 38 Quid.