cproo12 Posted December 24, 2015 Share Posted December 24, 2015 I just got a new Corsair K95 RGB with MX Browns and it doesn't seem to work with my computer. I have had CUE working with my Corsair M65 RGB for the past week or two and now that I plugged in my K95, my entire CUE application is broken completely. If I open the application it just hides, not viewable in the notification area, but only in the task manager as "Corsair Utility Engine (32 bit)". I have tried running the application as an administrator, reinstalling it, which also gave me errors (I was able to get around those by doing a system refresh) but now that it is reinstalled it just opens and shows in the task manager buit does not actually open or interface in any way with the devices. I do not have any other Corsair hardware or software on my machine other than a Corsair CS750M which does not in any way interface with my operating system. Link to comment Share on other sites More sharing options...
Shadoww Posted December 27, 2015 Share Posted December 27, 2015 Hmm, have you tried getting TM to switch to the CUE program? Are you booting it at start up? have you had this problem on any other computers? Try unplugging you mouse and see if it still does it? Link to comment Share on other sites More sharing options...
XaowaonChtaith Posted March 21, 2016 Share Posted March 21, 2016 Has anyone found a solution to this issue? The program was working fine yesterday and this morning the program will only open in the background. Link to comment Share on other sites More sharing options...
Inheritance Posted March 21, 2016 Share Posted March 21, 2016 Has anyone found a solution to this issue? The program was working fine yesterday and this morning the program will only open in the background. try restarting. Link to comment Share on other sites More sharing options...
XaowaonChtaith Posted March 23, 2016 Share Posted March 23, 2016 try restarting. I've already tried that and reinstalling the program. Link to comment Share on other sites More sharing options...
Inheritance Posted March 24, 2016 Share Posted March 24, 2016 I've already tried that and reinstalling the program. have you checked for bios and chipset updates? Link to comment Share on other sites More sharing options...
Dillingr Posted March 24, 2016 Share Posted March 24, 2016 I am having the same problem, Runs in the background but wont open. Tried restart / reinstall. Corsair Vengeance K95 RGB and Vengeance M65 RGB. Link to comment Share on other sites More sharing options...
ScarredMecha Posted March 24, 2016 Share Posted March 24, 2016 Use Task Manager to close CUE, then use Windows Explorer to go to the folder %appdata%\Corsair\HID Once there, delete config.cfg.lock if it is present. Link to comment Share on other sites More sharing options...
XaowaonChtaith Posted March 24, 2016 Share Posted March 24, 2016 Deleting the config files fixed it for me, thank you Link to comment Share on other sites More sharing options...
Dillingr Posted March 24, 2016 Share Posted March 24, 2016 Worked for me too, Thanks. Link to comment Share on other sites More sharing options...
IcePro Posted September 29, 2019 Share Posted September 29, 2019 (edited) I just got a new Corsair K95 RGB with MX Browns and it doesn't seem to work with my computer. I have had CUE working with my Corsair M65 RGB for the past week or two and now that I plugged in my K95, my entire CUE application is broken completely. If I open the application it just hides, not viewable in the notification area, but only in the task manager as "Corsair Utility Engine (32 bit)". I have tried running the application as an administrator, reinstalling it, which also gave me errors (I was able to get around those by doing a system refresh) but now that it is reinstalled it just opens and shows in the task manager buit does not actually open or interface in any way with the devices. I do not have any other Corsair hardware or software on my machine other than a Corsair CS750M which does not in any way interface with my operating system. Answer I dont know if anyone still reads this thread but I recently had this problem and the soltion for me was to download the corsair link 4 and run it at the same time as I tried to open iCUE. Only then can I use iCue. You can find and download it here https://www.corsair.com/ww/en/downloads and scroll down to the 6th alternative and jsut download it, start it and then try starting iCUE Edited September 29, 2019 by IcePro Forgot adding a link Link to comment Share on other sites More sharing options...
ToeSEFF Posted September 30, 2019 Share Posted September 30, 2019 I am still having issues with this. I reimage my computer just for this matter and still doesn't work. Link to comment Share on other sites More sharing options...
TacticalMaster Posted October 2, 2019 Share Posted October 2, 2019 I have the same problem here. iCUE is not opening for me. I was using an older version of the iCUE without updating, when suddenly my reprogrammed keys stopped working. I had no choice but to update iCUE and then it updated to the latest version. And that's where I am now: iCUE is no longer opening. I tried uninstalling and reinstalling, restarting, but it still wouldn't work. Also, opening LINK 4 and trying to launch iCUE didn't work for me. I only still see the LINK 4 window. Should of restarted though...any ideas around this issue? Link to comment Share on other sites More sharing options...
c-attack Posted October 2, 2019 Share Posted October 2, 2019 You guys have landed yourself in the now defunct CUE 1, CUE 2 forum from days long gone. You won’t see much traffic here. Check the main page in the iCUE forum. There are others reporting this issue. Link should have no bearing on operations since it is a separate program in a different file location. Also iCUE overrides it. Usually this stuff is a corrupt install, so first step should be a “repair install”. Windows -> Settings -> Apps -> click on iCUE -> Modify -> follows prompts. Link to comment Share on other sites More sharing options...
Recommended Posts