DevBiker Posted November 9, 2018 Share Posted November 9, 2018 Link to comment Share on other sites More sharing options...
Sacco Belmonte Posted November 10, 2018 Share Posted November 10, 2018 I need to take the measurements from the hub. As your instructions were to connect a hub fan port to the input of my CM hub. I will probably move the fuse from the last port from the hub to the one I blew first. Then use my multimeter to see what is what. Link to comment Share on other sites More sharing options...
drcmclow Posted November 12, 2018 Share Posted November 12, 2018 i just removed the connector of my lian li stimmer and replaced it with some jumpers... working perfect with icue... Link to comment Share on other sites More sharing options...
Sacco Belmonte Posted November 13, 2018 Share Posted November 13, 2018 Is corsair looking to integrate AURA devices into iCUE? I see AURA being included now in CoolerMaster's MasterPlus+ (albeit beta and seems to do nothing yet) Honestly I think every vendor should invest in iCUE and have all their stuff connected to a single protocol. Regardless of each controller/hub manufacturer. iCUE should be used to detect and manage all "RGB of things" because is frankly a mess right now. Link to comment Share on other sites More sharing options...
DevBiker Posted November 13, 2018 Share Posted November 13, 2018 There is an iCue => Aura/Mystic Light adapter that's available. It allows you to connect an Addressable RGB Device that works with Aura/Mystic light to a Lighting Channel on a Node Pro. And yes, Sacco Belmonte, I agree ... all ur RGBz are belong to iCue. ;-) Link to comment Share on other sites More sharing options...
Sacco Belmonte Posted November 13, 2018 Share Posted November 13, 2018 But I think everything in theory could be controlled by software as RGBSymc+ is showing. As long as you have all your respective RGB devices that the MOBO can detect and address to. Link to comment Share on other sites More sharing options...
bgunn925 Posted November 21, 2018 Share Posted November 21, 2018 (edited) Does this support Trident Z RGB RAM? Does this sync with brightness information or just RGB values? Edited November 21, 2018 by bgunn925 Link to comment Share on other sites More sharing options...
crashniels Posted November 23, 2018 Author Share Posted November 23, 2018 Does this support Trident Z RGB RAM? Does this sync with brightness information or just RGB values? No it doesn't support RAM yet. Asus has it in their documentation but it does not work. Yes it can sync with brightness and RGB values. It just mirrors the Color from "Sync-LED" to your devices. Link to comment Share on other sites More sharing options...
ntl Posted November 28, 2018 Share Posted November 28, 2018 Hi guys is you RGBSync+ still able to show ASUS LEDs? Mine used to but it doesn't show ASUS LED to mirror from anymore. Aura version is 1.06.17 :( Link to comment Share on other sites More sharing options...
Piplos Posted November 28, 2018 Share Posted November 28, 2018 UNBELIEVABLE, I can now control my TUF z370-Plus LEDs with iCUE, it's AMAZING! Link to comment Share on other sites More sharing options...
SpeedyV Posted November 28, 2018 Share Posted November 28, 2018 1. try running it as admin 2. try using aura 1.06.17. if you were on 1.07.xx then you are out of luck since downgrading is now only possible if you reinstall windows. (thanks asus) 3. try unblocking the zip before extracting but i guess that you dont need this as the corsair things are being detected. I am running Aura 1.07.22 because I had problems with 1.06.17. I have not tried this yet but am interested, but not enough to reinstall Windows just to regress Aura. Why would regressing Aura from 1.07.22 to 1.06.17 require a Windows re-install? Can't I uninstall 1.07.22, then run Aura Cleaner (which just deletes the directories AKAIK), and run CCCleaner to remove any remnants in the registry, reboot, and install 1.06.17? Thanks in advance for any info. Link to comment Share on other sites More sharing options...
ERD0C Posted November 29, 2018 Share Posted November 29, 2018 Is it possible to sync an EVGA GTX 1080 TI SC2 using this method? Also, I have been able to successfully use RGB sync to get my asus motherboard and g.skill trident to communicate with my Corsair LL fans, but I have only been able to control the lights using the Aura software. Is it possible to control the lights via the iCue software instead? Thanks for your help Link to comment Share on other sites More sharing options...
crashniels Posted December 2, 2018 Author Share Posted December 2, 2018 I am running Aura 1.07.22 because I had problems with 1.06.17. I have not tried this yet but am interested, but not enough to reinstall Windows just to regress Aura. Why would regressing Aura from 1.07.22 to 1.06.17 require a Windows re-install? Can't I uninstall 1.07.22, then run Aura Cleaner (which just deletes the directories AKAIK), and run CCCleaner to remove any remnants in the registry, reboot, and install 1.06.17? Thanks in advance for any info. well asus does not seem to be able to make proper installers nor uninstallers. it doesn't uninstall the correct files and that's why it seems to work after you uninstall it with ccleaner. Link to comment Share on other sites More sharing options...
crashniels Posted December 2, 2018 Author Share Posted December 2, 2018 Is it possible to sync an EVGA GTX 1080 TI SC2 using this method? Also, I have been able to successfully use RGB sync to get my ASUS motherboard and g.skill trident to communicate with my Corsair LL fans, but I have only been able to control the lights using the Aura software. Is it possible to control the lights via the iCue software instead? Thanks for your help In theory yes. It would be possible to sync the other way around. But first of all, the ram won't sync since the ram part of the ASUS SDK is broken or not even there; idk what ASUS did there. They documented it as being usable with all functions but it does not work. Secondly, for some people, including me, it does not work since asus has messed up aura platform wise. z370 works for example but x470 doesn't As for the EVGA card, probably no. EVGA doesn't have a public SDK that can be implemented. Link to comment Share on other sites More sharing options...
mpoffo Posted December 13, 2018 Share Posted December 13, 2018 I think I might be confused on this software. I thought it was to allow AURA to control Corsair devices. I used it a while ago and thought I was able to use only AURA to control the RGB but perhaps I did not dig deep enough. Can you control ASUS RGB with ICUE? I have a Rampage VI Extreme with lots of RGB. Link to comment Share on other sites More sharing options...
crashniels Posted December 14, 2018 Author Share Posted December 14, 2018 I think I might be confused on this software. I thought it was to allow AURA to control Corsair devices. I used it a while ago and thought I was able to use only AURA to control the RGB but perhaps I did not dig deep enough. Can you control ASUS RGB with ICUE? I have a Rampage VI Extreme with lots of RGB. It can be used both ways on the Intel boards we tested. z390 seems to be the only buggy one right now. As for AMD only x470 and b360 works and then only Aura -> ICue. Link to comment Share on other sites More sharing options...
rene mauricio Posted December 15, 2018 Share Posted December 15, 2018 (edited) As for AMD only x470 and b360 works and then only Aura -> ICue. The hell is an AMD B360? I think you must have meant B350 as I believe B360 is an intel "thing". If you meant B450 then I would like to chime in and disagree. I have a STRIX B450-I and this does not work. The board simply fails to show up as a device. Odd considering at the top of the first post you say; Note 1: This probably won't work on X370 or B350 but might work on X470 and B450. I wonder which B450 boards this does work on... Hrm. Edited December 15, 2018 by rene mauricio Link to comment Share on other sites More sharing options...
crashniels Posted December 15, 2018 Author Share Posted December 15, 2018 The hell is an AMD B360? I think you must have meant B350 as I believe B360 is an intel "thing". If you meant B450 then I would like to chime in and disagree. I have a STRIX B450-I and this does not work. The board simply fails to show up as a device. Odd considering at the top of the first post you say; I wonder which B450 boards this does work on... Hrm. Oops. Yeah i meant B450. I think someone on the Discord managed to get it to work on his board. Are you running it as admin? Is the board the only thing that is missing or is nothing showing up at all? Link to comment Share on other sites More sharing options...
crashniels Posted December 15, 2018 Author Share Posted December 15, 2018 The hell is an AMD B360? I think you must have meant B350 as I believe B360 is an intel "thing". If you meant B450 then I would like to chime in and disagree. I have a STRIX B450-I and this does not work. The board simply fails to show up as a device. Odd considering at the top of the first post you say; I wonder which B450 boards this does work on... Hrm. If you need any help you can join us on Discord. https://fanman03.ml/dl/ The link is under the download button. Link to comment Share on other sites More sharing options...
Dingo89 Posted December 16, 2018 Share Posted December 16, 2018 An absolute God send. Thank you! This is the RGBDroid I've been looking for! Is there any outlook to adding in Gigabyte support? Link to comment Share on other sites More sharing options...
mpoffo Posted December 16, 2018 Share Posted December 16, 2018 I am unable to make this run now with the latest versions of ICUE and AURA Sync. It use to work on my system. I am running it as an admin. Any recommendations? Link to comment Share on other sites More sharing options...
crashniels Posted December 20, 2018 Author Share Posted December 20, 2018 An absolute God send. Thank you! This is the RGBDroid I've been looking for! Is there any outlook to adding in Gigabyte support? I think they tried Gigabyte but they could not get the SDK to work. Same with MSI. Link to comment Share on other sites More sharing options...
crashniels Posted December 20, 2018 Author Share Posted December 20, 2018 I am unable to make this run now with the latest versions of ICUE and AURA Sync. It use to work on my system. I am running it as an admin. Any recommendations? If it does not open it is most likely an Asus Aura issue. It might be frozen "internally". And also the latest ICUE seems to have broken the Glaive RGB and the AIOs. Well that's what we noticed. ICUE 3.7.99 seems to work fine with them though. And as for Aura Asus doesn't seem to care at all. Link to comment Share on other sites More sharing options...
Zer0_rulz Posted January 9, 2019 Share Posted January 9, 2019 i tried this on asus tuf b360m e gaming mobo, it works, but using corsair led strip rgb will work too? Link to comment Share on other sites More sharing options...
crashniels Posted January 11, 2019 Author Share Posted January 11, 2019 i tried this on asus tuf b360m e gaming mobo, it works, but using corsair led strip rgb will work too? You could always try. We can only test the boards we and others on the discord have. But yes, the led strip should work. Link to comment Share on other sites More sharing options...
Recommended Posts