Seroko Posted March 22, 2014 Share Posted March 22, 2014 Hi! I received and installed the H100i yesterday with stock fans (I tried with 2 Cooler Master JetFlo but both came faulty :[pouts: ). I recorded a video of what happens when the computer starts up: [ame]http://www.youtube.com/watch?v=SPzE-qsktsU[/ame] As you can see, it works properly for a few seconds and then (just after logging on windows) the fans goes at 100% mode and the pump 'turns off' the light. I've tried everything I've read in the forum, unplugging the inner USB connector, plugging an external mini-USB/USB to the back of the mainboard, but nothing happens. I've tried plugging the inner USB to 3 different ports in the mainboard, but still the same problem. Yesterday it worked perfectly for several hours, it was recognized by the system, allowing me to change colour and profiles (that's what I want), but this morning I found the problem. I tried to update the firmware but I can't as long as it is not recognized by the system. I've tried thousands of times what theese guys said here: http://forum.corsair.com/v3/showthread.php?t=127179 And here: http://forum.corsair.com/v3/showthread.php?t=125190 But still doesn't work. http://i.imgur.com/eYjJGtZ.png Can it be faulty? Any other ideas? Edit: After changing between three internal USB ports, the last time I heard many times the sounds that windows plays when you connect and disconnect an USB gadget, but Link (and the LED light) still doesn't work at all. I'm very dissapointed on Corsair right now, I thought this brand didn't have this kind of problems, or they tried to fix them harder than it seems (I've seen threads from 2012 with the same problems, lol). I'm starting to regret changing my old Thermaltake Frio :rolleyes: Link to comment Share on other sites More sharing options...
Seroko Posted March 22, 2014 Author Share Posted March 22, 2014 After a couple of hours away, I arrived home, turned on the computer but with the fans connected directly to the motherboard PWM's (to control them with SpeedFan), and Corsair Link told me about finding a new Hydro 1.0.5 system (firmware, I guess) connected, but two seconds later it turned into this: http://i.imgur.com/oa56MGr.png And the LED light in the core turned off, as always. Link to comment Share on other sites More sharing options...
agung chandra Posted March 27, 2014 Share Posted March 27, 2014 same .. me to ... 100i not detected by Corsair Link:(: Link to comment Share on other sites More sharing options...
snapper69 Posted April 3, 2014 Share Posted April 3, 2014 Try here, there are a few ideas. http://forum.corsair.com/v3/showthread.php?t=120957 Link to comment Share on other sites More sharing options...
Seroko Posted April 3, 2014 Author Share Posted April 3, 2014 The problem is that after a few seconds the pump turns off the LED and it's not even recognized as a device. I've tried almost everything in that thread, or in another similar ones I've also tried disconnecting every single USB peripheral (even the internal USB ports from the front of the cage), and nothing happened. Link to comment Share on other sites More sharing options...
Seroko Posted April 12, 2014 Author Share Posted April 12, 2014 I've been searching in the forum and I think I know why this is happening: The fans I connected to the pump were both Cooler Master Jetflos, and they talk in this thread about this: http://forum.corsair.com/v3/showthread.php?t=123059 The fans stopped working and the store sent me another 2 fans, but this time I didn't connect them to the pump, not a single time. May be the pump damaged because of that? Should I ask for RMA to Corsair? Link to comment Share on other sites More sharing options...
escannihilator Posted April 12, 2014 Share Posted April 12, 2014 After a couple of hours away, I arrived home, turned on the computer but with the fans connected directly to the motherboard PWM's (to control them with SpeedFan), and Corsair Link told me about finding a new Hydro 1.0.5 system (firmware, I guess) connected, but two seconds later it turned into this: http://i.imgur.com/oa56MGr.png And the LED light in the core turned off, as always. the newest firmware is actually 1.0.7 Link to comment Share on other sites More sharing options...
Seroko Posted April 12, 2014 Author Share Posted April 12, 2014 Yeah, now I know that the Cooler Master Jetflos killed my pump, should I send it to Corsair to get a new one? Corsair should totally warn about the maximum consumption allowed by fans, cause there's not almost information about that. I found it searching on google, lol. Link to comment Share on other sites More sharing options...
Seroko Posted April 12, 2014 Author Share Posted April 12, 2014 So, does RMA cover 'missing information from the manufacturer'? :mad: Link to comment Share on other sites More sharing options...
Seroko Posted April 13, 2014 Author Share Posted April 13, 2014 Nothing??? Link to comment Share on other sites More sharing options...
Mem11 Posted April 14, 2014 Share Posted April 14, 2014 If you decide to replace one of the components with a 3rd party manufactured product, isn't it your responsibility to make sure it's compatible. If it were me and I had an "i" series hydro, I wouldn't be attaching anything to the unit unless it said "Corsair" on it. Have you tried to RMA it? Give it a shot, maybe Corsair will replace it. Link to comment Share on other sites More sharing options...
Seroko Posted April 21, 2014 Author Share Posted April 21, 2014 If you decide to replace one of the components with a 3rd party manufactured product, isn't it your responsibility to make sure it's compatible. If it were me and I had an "i" series hydro, I wouldn't be attaching anything to the unit unless it said "Corsair" on it. Have you tried to RMA it? Give it a shot, maybe Corsair will replace it. Isn't it their responsibility to write somewhere an advice to make you know that you can't use fans with more than 0.4amps? I had to go to internet and read on the forum, not in the instructions book or in the box. Actually, they didn't wrote anything at all, the answer was given by another customer with the same (logical) problem. Link to comment Share on other sites More sharing options...
Mem11 Posted April 22, 2014 Share Posted April 22, 2014 The H100i was designed to work with the fans that came with it. Corsair guarantees the unit will work properly as sold - You mod at your own risk. So no, if I were Corsair I wouldn't be putting a warning about the fans, that would indicate they approve of the use of third party fans, which would increase their liability if something did go wrong. If you were concerned, you probably should have taken a look at the specs on the fans that came with it. You would have noticed that the ones you intended to put on needed more than twice the current of the SP120's. I would hope that would have dissuaded you from attaching them to the pump. As I said before, you can always try to RMA it. You never know they might accept it. Link to comment Share on other sites More sharing options...
Seroko Posted May 31, 2014 Author Share Posted May 31, 2014 Finally, Corsair sent me a new one, that works properly. It's also recognized by Corsair Link, I've updated the firmware to 1.0.7. I connected the fans directly to the motherboard's PWM connectors, and everything goes perfect this way. In fact, the "Corsair" logo really suits in my case: http://i.imgur.com/tc0OvGol.jpg Link to comment Share on other sites More sharing options...
wytnyt Posted May 31, 2014 Share Posted May 31, 2014 Yeah, now I know that the Cooler Master Jetflos killed my pump, should I send it to Corsair to get a new one? Corsair should totally warn about the maximum consumption allowed by fans, cause there's not almost information about that. I found it searching on google, lol. your quite fortunate Corsair honored this warranty as 99% of other businesses would not have as any modification has never been allowed with any product. when a user decides to change things its really up to the consumer to inquire.,,it always has been it amounts to Corsair absorbing the cost of a hydro in order to satisfy a customer... kudo's to Corsair... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.