QuesoPasta Posted December 1, 2018 Share Posted December 1, 2018 Ive had those fans for at least 6 months now, they were working fine. i swapped cases and left them unnused for at least 1 month. i then decided i would put them in my new case, but to my surprise one of them is glitched out and the other is just not working https://cdn.discordapp.com/attachments/332053065471623168/518250983608811541/corsair1.png (the one on the left is always stuck on that blue color on the top) i disinstalled corsair link and installed icue instead, thought that might fix the problem, it didnt. all the latest drivers & stuff installed https://cdn.discordapp.com/attachments/332053065471623168/518250793045065728/unknown.png so i think it might be the fans that have gone bad? or did anyone have this problem before? Link to comment Share on other sites More sharing options...
QuesoPasta Posted December 1, 2018 Author Share Posted December 1, 2018 forgot to mention i swapped cables and everything infinite number of times Link to comment Share on other sites More sharing options...
DevBiker Posted December 1, 2018 Share Posted December 1, 2018 Your screen cap of the Lighting Channel Configuration indicates that nothing is on the channel. You need to configure the channel for 2 LL fans - iCue won't pick them up. Link to comment Share on other sites More sharing options...
QuesoPasta Posted December 1, 2018 Author Share Posted December 1, 2018 Your screen cap of the Lighting Channel Configuration indicates that nothing is on the channel. You need to configure the channel for 2 LL fans - iCue won't pick them up. https://cdn.discordapp.com/attachments/332053065471623168/518576307131514883/unknown.png ive tried stuff in the software too i tried to plug the 4pin rgb cable directly on my motherboard and it gives out the same result, the left one gets a blue light on top and the other just doesnt work Link to comment Share on other sites More sharing options...
PJH Posted December 2, 2018 Share Posted December 2, 2018 Hey, hey! The 4-pin RGB of the LL fans require 5v connection. If you tried to connect it to a 12v RGB Header on your motherboard, you've most likely just fried your fan. Corsair fans cannot be controlled via motherboard RGB Headers - 5v or 12v. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.