View Single Post
Old 12-30-2017, 02:18 AM
DevBiker's Avatar
DevBiker DevBiker is offline
DevBiker's PC Specs
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,519
POST ID # = 932962
DevBiker Reputation: 88

One comment ... if you read the blog post, it says "rotate the cooler’s pre-installed bracket and remove it."
While true, that's not the whole story. If you grab the bracket and just rotate it, you won't get anywhere. At all.
Instead, if you are holding the bracket with the copper cold plate "up", then you need to push down slightly on the bracket. This releases the clips and allows you to then "rotate the cooler's pre-installed bracket and remove it".
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote