pcVault Posted June 3, 2009 Share Posted June 3, 2009 Hi...i have a problem with the voltages when i am trying to set my ram at 1600-9-9-9-24-2N!...the bios sets the dram-1.78:eek: and qpi/dram 1.39:eek:,...,i tried with 1.65 & 1.3 but it can't even post! any help guide will be welcome:biggrin: Link to comment Share on other sites More sharing options...
Wired Posted June 3, 2009 Share Posted June 3, 2009 To be clear, you have 2 packs of TR3X6G1866C7GTF? Does it all run fine with one pack? Link to comment Share on other sites More sharing options...
pcVault Posted June 3, 2009 Author Share Posted June 3, 2009 ...well,...,i memtest my 1st pack-(3x2)-with x.m.p.,2 passes no error!!!{{i had already test them when i've got them}},then i put my 2nd pack,...at first memtest & vista saw only 4gb...i tried to raise the voltages dram-1.67,qpi/dram-1.65 but nothing change!!!then i memtest each stick from the ''faulty pack''... 1st dimm errors from the 1st pass,test 6,(x.m.p) 2nd dimm no errors for 5 passes(x.m.p),then i put again the 1st dimm and finished 4 passes no errors,;) with the 3rd dimm (x.m.p) it couldn't even post...{this last one i'm gonna give it to my dog:laughing:} Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 4, 2009 Corsair Employee Share Posted June 4, 2009 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
pcVault Posted June 10, 2009 Author Share Posted June 10, 2009 Ok...I sent the package today!...this is my first RMA and i'm a bit nervous:p:...i hope you take a good care of me:D:...thanks ram guy! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 10, 2009 Corsair Employee Share Posted June 10, 2009 NP and you know with 2 sets of these you will likely have to run them at DDR1600 right? Link to comment Share on other sites More sharing options...
pcVault Posted June 10, 2009 Author Share Posted June 10, 2009 ''Yes'',..,first i will test if they could stay stable at the default frequency with a bit loose timings and then the opposite!...did you happen to test 12gb of these on any mobo? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 10, 2009 Corsair Employee Share Posted June 10, 2009 Yes HX3X12G1333C9 or HX3X12G1600C9 would be the tested solution for 12 Gig. Link to comment Share on other sites More sharing options...
pcVault Posted June 20, 2009 Author Share Posted June 20, 2009 Hi:):...i think there is a problem with my r.m.a.!...when i sent the package,at the post office,they told me that the ''shipment'' will take from 2 to 3 days...but my r.m.a. status still says ''not yet received''! Is this normal?!? Link to comment Share on other sites More sharing options...
Wired Posted June 20, 2009 Share Posted June 20, 2009 There's nothing anyone here can do without you posting your RMA # :) That having been said, generally speaking RMA update questions should really go through Customer Support (via phone or email), as it's largely out of the tech support guys' hands after you send it in. Link to comment Share on other sites More sharing options...
pcVault Posted June 20, 2009 Author Share Posted June 20, 2009 ...my RMA is #1110145! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 22, 2009 Corsair Employee Share Posted June 22, 2009 Did you get a tracking number from the shipper that you used, and does it show that it has been delivered? Link to comment Share on other sites More sharing options...
pcVault Posted June 24, 2009 Author Share Posted June 24, 2009 Hi:):...the package left Greece at 11-6 with the flight ''3122'' and number ''RE694719055GR'' to Holland!...(and arrived Holland the same day)! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 24, 2009 Corsair Employee Share Posted June 24, 2009 I have sent our customer service a message and asked them to check this for you check this for you and send the status to you, but you may want to call them for faster service at 510-657-8747 Ext "3". Link to comment Share on other sites More sharing options...
pcVault Posted June 24, 2009 Author Share Posted June 24, 2009 Thanks for the help RamGuy!...i hope they received my package and just forgot to update the rma status page:):! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 25, 2009 Corsair Employee Share Posted June 25, 2009 NP you should have heard from them by now let me know if not! Link to comment Share on other sites More sharing options...
pcVault Posted June 26, 2009 Author Share Posted June 26, 2009 ...Nothing yet...! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 26, 2009 Corsair Employee Share Posted June 26, 2009 You replied to your case and in doing so stopped the message I sent to Customer Service. Please do not reply to your case and if you do not hear from them please call in at 510-657-8747 Ext "3". Link to comment Share on other sites More sharing options...
pcVault Posted June 26, 2009 Author Share Posted June 26, 2009 ...Ok,they told me,that my replacement has been processed via UPS...thanks again for your help RamGuy!:): Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 26, 2009 Corsair Employee Share Posted June 26, 2009 NP and sorry about the delay! Link to comment Share on other sites More sharing options...
pcVault Posted June 26, 2009 Author Share Posted June 26, 2009 You have nothing to sorry:):...i choose to rma via corsair cause i trust you/them!...i know that i could use the ''rma'' via my reseller,here in Greece,but things here it's a bit......:laughing:!Thanks again! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 30, 2009 Corsair Employee Share Posted June 30, 2009 NP and please let me know if you have any more questions! Link to comment Share on other sites More sharing options...
pcVault Posted July 5, 2009 Author Share Posted July 5, 2009 Hi:)...2 days ago i recieved the replacement memory,tested with ibt,(5 runs) and memtest(2 passes) was ok!...but when i putted all the ram,the bios still raise the voltage 1.78/1.4 for 1600!... Now i have 1600 9-9-9-24 2N 1.6/1.35 and so far it looks stabe,ibt(10 runs) and games!...(stupid bios:laughing:) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted July 6, 2009 Corsair Employee Share Posted July 6, 2009 Great news and thanks for letting us know! Link to comment Share on other sites More sharing options...
pcVault Posted July 20, 2009 Author Share Posted July 20, 2009 Hi!:)...yesterday when i was playing fc2 my pc locked itself and restart!...sadly one stick died!...The last 15-20 days everything was ok and stable,(1600 9-9-9-24 2N 1.6/1.33)and then...any ideas? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.