rschultz101 Posted March 4, 2020 Share Posted March 4, 2020 Hi , new to this --> Ironclaw mouse - in bluetooth mode, can not change default LEDS ? (solid or off) - only works to change the LED plugged in USB with iCue - don't see how to change the default profile so it sticks in wireless mode - don't see a save button in icue , or what to do appreciate any help/tips. thanks Link to comment Share on other sites More sharing options...
Apophis3 Posted March 7, 2020 Share Posted March 7, 2020 You can, but it has to be saved to a hardware profile. Link to comment Share on other sites More sharing options...
c-attack Posted March 9, 2020 Share Posted March 9, 2020 You cannot connect the device to software when transmitting via BT. That is the limit of the technology. You need the USB or 2.4 GHz receiver for that. As mentioned above, if you save the lighting you want to the device via the HW profiles, those changes will stay in place when in BT mode. However, you cannot access the software and will need to wire up to do so. Link to comment Share on other sites More sharing options...
Recommended Posts