cmosfxx Posted July 16, 2017 Share Posted July 16, 2017 Hello everyone, 12v rail measured by a good Fluke multimeter is always near 11.86v load or idle. (setup is nothing crazy, i5 6500+gtx 1060) I remember when I first got it, voltage was around 11.92v. (still not perfect but I convinced myself to keep it) This is way too off based on every review I've seen on the internet and it seems that it's degrading somehow. I know it's still in ATX specs but is this a bad batch or something? Should I keep it or return it ? Link to comment Share on other sites More sharing options...
Corsair Blake Posted July 17, 2017 Share Posted July 17, 2017 Hello there! This isn't a bad batch and it's perfectly fine. It's in fully working condition. As someone who used to create custom PSU cables before I joined CORSAIR, 11.86 is perfectly fine. The cables I made without any capacitors on it gave me 11.7v performance and have been running for years, still constantly at 11.7v so you're not going to have an issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.