fatum2002 Posted September 17, 2019 Share Posted September 17, 2019 I have MP510 with Win10 installed on it. There are two other drives: Crucial MX500 and WD HDD. Corsair SSD Toolbox v1.2.5.7 Toolbox reports that there is update for SSD from version 12.2 to version 22.5. When I click update it downloads firmware, but then fails during installation. What am I missing? Is it because W10 is installed on this drive? I checked BIOS and SATA is in AHCI mode. Please advice on how to update the firmware. Link to comment Share on other sites More sharing options...
Yemble Posted September 17, 2019 Share Posted September 17, 2019 AFAIK, the latest firmware for the MP510 is ECFM12.3 (see my other posts https://forum.corsair.com/v3/showthread.php?t=188547 ). ECFM22.5 just sounds completely wrong. Google it and you will get no results. Just another Corsair software screw-up I fear :roll: 1 Link to comment Share on other sites More sharing options...
fatum2002 Posted September 17, 2019 Author Share Posted September 17, 2019 (edited) AFAIK, the latest firmware for the MP510 is ECFM12.3 (see my other posts https://forum.corsair.com/v3/showthread.php?t=188547 ). ECFM22.5 just sounds completely wrong. Google it and you will get no results. Just another Corsair software screw-up I fear :roll: Are you talking about this thread https://forum.corsair.com/v3/showthread.php?t=188547 ? Would you recoomend to update from 12.2 to 12.3. Thread https://forums.overclockers.co.uk/threads/firmware-12-3-info-for-nvme-drives-using-the-ref-phison-e12-controller.18859737/ says that firmware update is destructive and I will loose all my data. I don't want to re-install windows and all the software again... As I understand you used Phison utility for that? Thanks. Actually, nevermind, I already upgraded to 12.3 following your advice... Everything went smooth and easy. Data is wiped only when updated from version 11. Edited September 17, 2019 by fatum2002 Link to comment Share on other sites More sharing options...
Zink Posted September 17, 2019 Share Posted September 17, 2019 I get the same problem it wants me to upgrade to ECFM22.5 from ECFM12.3 but it fails the upgrade. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Kevin Posted September 18, 2019 Corsair Employee Share Posted September 18, 2019 Hi all, this was a bug in the updater, and was fixed last night. 12.3 is the newest firmware for the MP510, so please disregard. Thank you! Link to comment Share on other sites More sharing options...
gregsoir Posted September 18, 2019 Share Posted September 18, 2019 Hi all, this was a bug in the updater, and was fixed last night. 12.3 is the newest firmware for the MP510, so please disregard. Thank you! I'm getting the same error when trying to update from 12.2 to 12.3 via official updater. Still a bug? it says "firmware update failed" Link to comment Share on other sites More sharing options...
Furyan Posted September 19, 2019 Share Posted September 19, 2019 (edited) I was initially getting the same thing, failure to download firmware 22.5. I just ran Corsair SSD Toolbox again and it correctly saw 12.3 (so fix worked) and it downloaded and installed without any problem, required a restart. I upgraded my C: (OS) drive, running Windows 10. Edited September 20, 2019 by Furyan Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Kevin Posted September 19, 2019 Corsair Employee Share Posted September 19, 2019 I'm getting the same error when trying to update from 12.2 to 12.3 via official updater. Still a bug? it says "firmware update failed" It should work, but I can follow up with the driver team. Can you give it another shot after rebooting? Link to comment Share on other sites More sharing options...
Furyan Posted September 20, 2019 Share Posted September 20, 2019 It should work, but I can follow up with the driver team. Can you give it another shot after rebooting? Any chance you can give us an idea of what was updated/fixed with 12.3? Link to comment Share on other sites More sharing options...
gregsoir Posted September 21, 2019 Share Posted September 21, 2019 It should work, but I can follow up with the driver team. Can you give it another shot after rebooting? i rebooted and it now shows I got 12.3 installed... :laughing: but anyway, yeah, what changed in 12.3? are there any changlogs available? Link to comment Share on other sites More sharing options...
gooral22 Posted September 25, 2019 Share Posted September 25, 2019 Hi. Cananybody tell me if that is ok ? I have MP510 with Win10 installed on it. Corsair SSD Toolbox v1.2.5.7 Toolbox reports that my firmware version is 22.5. Crystal Disk info reports the same. Thanks. Link to comment Share on other sites More sharing options...
joelslaw Posted October 1, 2019 Share Posted October 1, 2019 (edited) My drive is still failing to update. When I try to update it is showing the available firmware version as 22.5, not 12.3. See the screenshots below. I am on SSD Toolbox version 1.2.5.7 and have restarted. Even tried uninstalling and reinstalling SSD Toolbox and restarting again. No change. Update 10/10/2019: Just wanted to let you know, I tried again today and the update to 12.3 went fine. It was probably due to the caching issue "Corsair Kevin" mentioned below. Unfortunately I didn't see that post till just now. But it looks like the caching issue resolved itself over time. All is good now. Thank you! Edited October 10, 2019 by joelslaw Status Update Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Kevin Posted October 2, 2019 Corsair Employee Share Posted October 2, 2019 This is likely due to a caching issue. Try the steps in this post: https://forum.corsair.com/v3/showpost.php?p=1017682&postcount=16 Link to comment Share on other sites More sharing options...
indubioproretro Posted October 9, 2019 Share Posted October 9, 2019 (edited) Hey there. I installed an MP510 with 960GB in my new ASUS GU502G past weekend, and restored Windows with an image I made before. This far - no problems at all. System is fast and reliable as before. Installed the latest version of the SSD Toolbox from the Corsair website. But - the Corsair SSD Toolbox does not show all infos. I don`t get temperature readings nor infos about how many bits and bytes have been written before. The firmware version installed shows EFCM22.5. The button for upgrade is not avail. Installed the toolbox three times - all with the same problems. Tried the troubleshoot explained above - didn`t helped. Any idea? Thanks in advance. Edited October 10, 2019 by indubioproretro Link to comment Share on other sites More sharing options...
indubioproretro Posted October 16, 2019 Share Posted October 16, 2019 And I made a clean install of Windows 10 (1903) this week on this MP510 SSD - and again the Corsair SSD Toolbox (1.2.5.7) and CrystalDisk SSD Info show me, that this SSD has the firmware "ECFM22.5" installed. I can hit the update button, but this only tells me that I already have the latest firmware installed. Rebooting, or "abuse" of the ipconfig tool didn't helb either... Link to comment Share on other sites More sharing options...
Monstieur Posted November 11, 2019 Share Posted November 11, 2019 There seems to be a newer firmware for Phison E12 drives. My Inland Premium 2TB drives just shipped with ECFM22.4. Link to comment Share on other sites More sharing options...
Recommended Posts