tenewrt
-
Posts
8 -
Joined
-
Last visited
-
My rams were fixed after I updated the bios atleast they show up on the app but the software is always buggy i have msi mpg b650
-
Corsair latest Icue Causes Performance issues
tenewrt replied to tenewrt's topic in iCUE Software Troubleshooting
Hello do you still have the problem i fixed it by updating the bios and the cpu usage is non existent on my system with icue open it might be the issue because i had issues with icue before updating -
im using the ryzen 7 7800x3d and corsair h150i rgb for the cooling But for some reason opening icue now Makes my cpu temps 10 degrees higher and uses 12 % proccessor its running 50-55 on Icue and on higher fan speed when i turn off Icue the cpu temps drop significantly i dont know the issue i clean installed Icue and everything but still have the issue i was using cpu curves but then changed it to liquid temprature but still same issues
-
I did this the warning gone away but the icue keeps crashing and not working the light get stuck on single color my fans and also my rams when disabling icue the lights work fine but the fan curves did not work and caused overheat so when i open icue it happens like this everytime
-
I have built a pc with the qx120 fans and with the h150i rgb i first connected them all from 1 port but it said overcurrent so i connected the other port 2 to the other end of the icue system it worked at first and the fans could go full speed too but then randomly i get this notification from icue
-
i have the same motherboard and my rams are 6400mhz dominator the issue happens when i set the ram speed to 6400 mhz because when the rams are like 5800 default the software detects them and it works normally on 6400mhz only one rams detected or none and the rams become unsencronized
-
no it happens every time i boot up and when icue opens it still shows for 30 seconds but then it gets stuck and its show error on icue.
-
I assembled my PC with the specified RAM modules, and initially, everything was functioning smoothly. However, upon installing iCUE, issues arose. I had previously been using MSI Mystic Light for the motherboard's lighting, but I disabled it. The RAM modules functioned properly initially, but now, whenever iCUE is launched, they become stuck on the green color and do not respond as expected.
