DeadxWreckoning Posted March 16, 2021 Share Posted March 16, 2021 Hello everyone, So I have a new XD3 pump. Whenever I boot my PC or wake it, the pump runs at full speed before settling down to my speed set in iCue. That being said, this XD3 is replacing a XD5 I had and that pump didn't create any noise on boot/wake. I have it plugged into port #6 on my Commander Pro, and also tried setting the fan type as "4 pin" and "auto" to no avail. Auto makes it run at roughly medium speed for about 5 seconds, while 4 pin makes it run at max speed for about 1 second. How can I set the pump to make no noise when booting/waking like my XD5 did? Thanks. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted March 16, 2021 Corsair Employee Share Posted March 16, 2021 Your question would be best addressed in our HydroX sub-forum. https://forum.corsair.com/v3/forumdisplay.php?f=303 Link to comment Share on other sites More sharing options...
Recommended Posts