Corsair Employee Corsair James Posted January 11, 2019 Corsair Employee Share Posted January 11, 2019 Hi everyone, Here are the official patch notes for iCUE v3.11.114 Patch Notes for iCUE v3.11.114 iCUE v3.11 will now support the following products being announced at CES 2019: Harpoon RGB Wireless CORSAIR ONE (2019 Models) Dominator Platinum RGB DDR4 Memory H100i RGB Platinum SE Ironclaw RGB Resolved a security issue with Corsair Service (Thanks to everyone who reported this issue to us, especially Joe Doran, Emma McCall, and Brady Donovan) Resolved an issue with Notifications and temperature thresholds not reverting from new changes Resolved an issue with tooltips not appearing on all devices in Space and Dashboard Improved how Notifications are displayed when they are active/inactive Resolved an issue with Hydro Series PRO Coolers and specific lighting effects not saving properly to the device Hydro Series Platinum Coolers now share lighting effects and lighting libraries (users sharing profiles between devices will no longer require the exact device to see the configured lighting effects) Resolved an issue with Hardware Lighting - Arc Lighting Effect with Hydro Series Platinum Coolers Resolved a rare issue with Mic Volume and Sidetone values not matching between iCUE Space and device settings Resolved a rare issue with Dashboard and System Information not properly displaying Resolved an issue with VOID PRO Wireless headsets triggering auto-shutdown despite audio being played Glaive DPI brightness intensity can now be adjusted Resolved an issue that allowed Lighting Effect - Temperature values to be equal to one another Resolved an issue with K66 Keyboards and the right Win key Resolved an issue with OSD with certain Corsair gaming mice Resolved other various minor issues and bugs Update: There is a known issue with a certain VIA chipset and wireless products that may result in a crash when waking from sleep. The VIA 3.0 chipset in question is using driver version: 10.0.17134.1. We recommend, if possible, to switch your wireless dongle to a different USB port that isn't using this specific chipset to avoid any potential issues with device performance and iCUE. Link to comment Share on other sites More sharing options...
dcx4610 Posted January 11, 2019 Share Posted January 11, 2019 Just upgraded and my Corsair Hydro 115i pump seems to be all over the place in the dashboard. Every couple of seconds, the pump is going from 1950, 1980 and 2010 on quiet. I don't know if this is normal or what but it seemed like it stayed at a consistent 1980 on previous builds. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted January 11, 2019 Author Corsair Employee Share Posted January 11, 2019 Just upgraded and my Corsair Hydro 115i pump seems to be all over the place in the dashboard. Every couple of seconds, the pump is going from 1950, 1980 and 2010 on quiet. I don't know if this is normal or what but it seemed like it stayed at a consistent 1980 on previous builds. This is normal behavior if its within +/- 50-100 RPM. The pump is designed to report the speed at specific intervals. If you see it jumping 200 RPM or more, then that would be something we have to investigate. Link to comment Share on other sites More sharing options...
dcx4610 Posted January 11, 2019 Share Posted January 11, 2019 This is normal behavior if its within +/- 50-100 RPM. The pump is designed to report the speed at specific intervals. If you see it jumping 200 RPM or more, then that would be something we have to investigate. Thanks for the quick response. Link to comment Share on other sites More sharing options...
Sacco Belmonte Posted January 11, 2019 Share Posted January 11, 2019 No changes CPU wise here. I still prefer not to run iCUE and set up a good hardware mode (lighting, cooling performance) that works for me. Link to comment Share on other sites More sharing options...
dtan Posted January 11, 2019 Share Posted January 11, 2019 Lighting profile is saving to my K70 RGB and Scimitar RGB again and other devices that had issues from the v3.10.x software. Surprised it wasn't an important enough fix to mention in the patch notes. Link to comment Share on other sites More sharing options...
momorious Posted January 11, 2019 Share Posted January 11, 2019 - Glaive DPI brightness intensity can now be adjusted This is not working for me. No matter what brightness I set in the options, the annoying blue non-rgb-led is always the same brightness. Link to comment Share on other sites More sharing options...
momorious Posted January 11, 2019 Share Posted January 11, 2019 Also, hardware lighting on my H115i Platinum is not saved and always reverts back to rainbow wave. So the PC starts with the pump in rainbow wave instead of the saved static white hardware lighting... Link to comment Share on other sites More sharing options...
cplifj Posted January 11, 2019 Share Posted January 11, 2019 Beschrijving Pad naar toepassing met fout: C:\Program Files (x86)\Corsair\CORSAIR iCUE Software\Corsair.Service.exe Probleem met handtekening Naam van probleemgebeurtenis: CLR20r3 Probleemhandtekening 01: Corsair.Service.exe Probleemhandtekening 02: 3.11.0.28 Probleemhandtekening 03: 5c18ea7c Probleemhandtekening 04: System.Management Probleemhandtekening 05: 4.7.3190.0 Probleemhandtekening 06: 5b6947cb Probleemhandtekening 07: 8c Probleemhandtekening 08: 3f Probleemhandtekening 09: System.Management.Management Versie van besturingssysteem: 10.0.17763.2.0.0.256.48 Landinstelling-id: 1043 Aanvullende informatie 1: 2beb Aanvullende informatie 2: 2beba6fb4680d73a8c78ca7c24ccdb46 Aanvullende informatie 3: 97ce Aanvullende informatie 4: 97ceb85ecaf594a129813a47cd931957 Bestanden die helpen bij het beschrijven van het probleem WERInternalMetadata.xml Tijdelijke kopie van deze bestanden weergeven Waarschuwing: Het openen van een kopie van deze bestanden kan schadelijk zijn voor uw computer als een virus of een ander beveiligingsprobleem het probleem veroorzaakt. as shown, still the same problem when shutting down or rebooting windows 10. GOOD JOB. Link to comment Share on other sites More sharing options...
DeadxWreckoning Posted January 12, 2019 Share Posted January 12, 2019 I'm still having an issue that I had appear with the last update that persists with this version. I reported it in the last thread but received no response. The rainbow wave hardware lighting profile for my LL fans is broken. Before the last two updates, when my PC was locked/booting the fans displayed their default rainbow wave profile. I get not everyone likes this (hence the inclusion of hardware profiles) but I do. But now, the rainbow wave profile is broken; It's like an altered version of color shift. I've already done a completely clean install of iCue. What can be done to fix this? Link to comment Share on other sites More sharing options...
Wulffe Posted January 12, 2019 Share Posted January 12, 2019 Hey guys! Thanks for the update. I still have an issue with icue no detecting my H115i after updates. I have to uninstall, download from web, and then install icue before my H115i are detected. It has no problem detecting my LINK and HS70. I hope you can fix my issue - Thanks :sunglasse Link to comment Share on other sites More sharing options...
drcmclow Posted January 12, 2019 Share Posted January 12, 2019 after update it dont work at all for me... vcruntime140.dll not found... Link to comment Share on other sites More sharing options...
Psycycb Posted January 12, 2019 Share Posted January 12, 2019 still ping pong does not work correctly. first three fans the lights are moving in the opposite direction Link to comment Share on other sites More sharing options...
nitz Posted January 12, 2019 Share Posted January 12, 2019 Resolved an issue with VOID PRO Wireless headsets triggering auto-shutdown despite audio being played Ooooh good I was hoping this would get fixed soon, was really annoying sometimes! :) Link to comment Share on other sites More sharing options...
Holo321 Posted January 13, 2019 Share Posted January 13, 2019 This update ruined everything... In the last patch my ll fans started to be on 1000-1200rpm on quiet mode. I was about to send all these dumb fans back and never buy anything from corsair again. Then i found out that the only way to fix it was to restart the damn iCue Service. Now finally an update I thought... But guess what? They didnt fix the 1000-1200rpm ll120 quiet mode bug, and now you cant even fix it yourself with restarting the dumb iCue Service over and over again. My ears are about to get cancer and iCue is getting updates for future products... Anybody has this problem too? Link to comment Share on other sites More sharing options...
DevBiker Posted January 13, 2019 Share Posted January 13, 2019 This update ruined everything... In the last patch my ll fans started to be on 1000-1200rpm on quiet mode. I was about to send all these dumb fans back and never buy anything from corsair again. Then i found out that the only way to fix it was to restart the damn iCue Service. Now finally an update I thought... But guess what? They didnt fix the 1000-1200rpm ll120 quiet mode bug, and now you cant even fix it yourself with restarting the dumb iCue Service over and over again. My ears are about to get cancer and iCue is getting updates for future products... Anybody has this problem too? Those LL fans ... are they connected to a Commander Pro? Any fan connected to a CoPro really needs to have a custom curve - the default curves are all going to be based on CPU temp and that's going to go all over the place ... and give you the behavior that you describe. Link to comment Share on other sites More sharing options...
Holo321 Posted January 13, 2019 Share Posted January 13, 2019 Those LL fans ... are they connected to a Commander Pro? Any fan connected to a CoPro really needs to have a custom curve - the default curves are all going to be based on CPU temp and that's going to go all over the place ... and give you the behavior that you describe. thanks i created one. Just thought it was a bug because when i restarted the corsair service it worked on 900rpm. If i didnt it worked on 1500 for some reason. Link to comment Share on other sites More sharing options...
DevBiker Posted January 13, 2019 Share Posted January 13, 2019 thanks i created one. Just thought it was a bug because when i restarted the corsair service it worked on 900rpm. If i didnt it worked on 1500 for some reason. And what temperature is it tied to? Of course, without system specs, we cannot provide any guidance on the best way to do that. However, there are plenty of comments on this forum if you look. Link to comment Share on other sites More sharing options...
Fregi Ventum Posted January 13, 2019 Share Posted January 13, 2019 I can confirm that the update is allowing me to store hardware profiles on my M65 Pro RGB mouse once more. Thanks team! Link to comment Share on other sites More sharing options...
drcmclow Posted January 13, 2019 Share Posted January 13, 2019 reinstalled it and it worked...im using a i78700k with a onboard gpu and win10 18312! still having the same errors ..-dashboard is just black and is very laggy when opening or closing it (the fade in and fout out effekt is laggy) -no more messages (osd) when changing profiles -always commander pro message to update the driver (when i click update it comes again after updating)-icue right click for desktop icue area not showing up at all since last update..-corsair strafe sometims gets freezs inside of icue and wont show up Link to comment Share on other sites More sharing options...
Croakk Posted January 13, 2019 Share Posted January 13, 2019 Was hoping this update would resolve my Vengeance PRO RGB not showing up in iCUE but still no luck Link to comment Share on other sites More sharing options...
railgrinder Posted January 13, 2019 Share Posted January 13, 2019 Beschrijving Pad naar toepassing met fout: C:\Program Files (x86)\Corsair\CORSAIR iCUE Software\Corsair.Service.exe Probleem met handtekening Naam van probleemgebeurtenis: CLR20r3 Probleemhandtekening 01: Corsair.Service.exe Probleemhandtekening 02: 3.11.0.28 Probleemhandtekening 03: 5c18ea7c Probleemhandtekening 04: System.Management Probleemhandtekening 05: 4.7.3190.0 Probleemhandtekening 06: 5b6947cb ..... as shown, still the same problem when shutting down or rebooting windows 10. GOOD JOB. Yeah, what a joke. I'm still experiencing this problem. Nothing fixed since the previous version even after all the numerous posts from other users. I didn't expect to spend a lot of money to get errors from day one, but here we are. Side note: This is on a clean install because I figured the previous installation might have been borked already. This only occurs after reboot/login on my end. Fault bucket 1173126435735636453, type 5 Event Name: CLR20r3 Response: Not available Cab Id: 0 Problem signature: P1: Corsair.Service.exe P2: 3.11.0.28 P3: 5c18ea7c P4: System.Management P5: 4.7.3190.0 P6: 5b6947cb P7: 8a P8: 51 P9: PSZQOADHX1U5ZAHBHOHGHLDGIY4QIXHX P10: Attached files: \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3D66.tmp.WERInternalMetadata.xml These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Corsair.Service._76bcc4d0fc4185224344b63781b350fca256aee6_c5720d30_0b584844 Analysis symbol: Rechecking for solution: 0 Report Id: 9ad3bdb5-7cc4-4782-a8f3-cbb849a0c4f6 Report Status: 268435552 Hashed bucket: 777904e42454ea073047c8471ea489e5 Cab Guid: 0 Link to comment Share on other sites More sharing options...
ilucha Posted January 13, 2019 Share Posted January 13, 2019 Since a few updates my H115i is not displaying the correct color.If I set the color to solid white it shows pink instead, same goes for darker green etc. Almost any color selected in iCUE shows a different color on the H115i (except for very few colors like red and pink). Anybody can reproduce this? Link to comment Share on other sites More sharing options...
hails8tn Posted January 13, 2019 Share Posted January 13, 2019 so is the issue with the sidetone not reactivating when muting and unmuting the void pro wireless ever going to be fixed? Link to comment Share on other sites More sharing options...
Syberon Posted January 14, 2019 Share Posted January 14, 2019 So sad that Vengeance RGB PRO still generate high CPU load in full software control mode, this update doesn't resolved this issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.