vampsthevampyre Posted February 7, 2018 Share Posted February 7, 2018 Hellllllp I currently have 2xLL120 RGB 3 pan packs. Using one of the included lighting node pro's I get the following problem. Add fans 1-3 in the corsair link software, all 3 fans work perfectly, full control add fan 4 in the corsair link software, Fan 4 does not light and there is no control add fan 5 in the corsair link software and fan 4 lights up with full control add fan 6 in the corsair link software and fan 5 lights up with full control Fan 6 stays dark, swap fans 5 and 6 in the hub and fan 6 then works. Tried reflashing the firmware initially all fans light up, but as soon as you try to control them the issue above reappears. Tried the other lighting node pro from the second 3 fan pack and the same thing happens. Tried an older version of the link software and no different This is doing my nut in, any help would be appreciated cheers Ian Link to comment Share on other sites More sharing options...
DevBiker Posted February 7, 2018 Share Posted February 7, 2018 Put fan 4 at the end. Put fans 5&6 in positions 4&5. What happens? Link to comment Share on other sites More sharing options...
vampsthevampyre Posted February 8, 2018 Author Share Posted February 8, 2018 It didn't work fault stayed just on a different fan , but what I did find out the solution was I removed EVGA's precision XOC and replaced it with MSI afterburner. Everything is working fine now. Thanks for your help Link to comment Share on other sites More sharing options...
Yetti Posted February 8, 2018 Share Posted February 8, 2018 Yep guys...when ever you have a problem with either lighting or controlling fan RPM speeds its always best to have no other lighting or fan control sofware running... as they can interfere with the Corsair Link Software. So do your setup with no other software running until you are completely happy with your setup, and then if you want to run additional software for lighting or fan control to see if it affects Link or your setup then that's ok... hope this helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.