The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Legacy Corsair Software (https://forum.corsair.com/forums/forumdisplay.php?f=267)
-   -   CUE profiles doesn't switch after lock and unlock Win 10 (https://forum.corsair.com/forums/showthread.php?t=171486)

TerrorBlade 10-02-2017 06:36 AM

CUE profiles doesn't switch after lock and unlock Win 10
 
Hello and sorry in advance if there is already a thread about but i wasn't able to locate it.

When i power up my computer all the CUE 2 profiles can change automatically based on the application i am using at the moment ( and that i have linked to the profiles ) but if i leave my computer for some time and it locks and then i unlock it it stays to the default profile that i have set and it doen't change. If i open the CUE2 software and try to change the profiles manually i observed that on the one hand they change but on the other hand neither the macros work nor the lightning effect changes. If i exit CUE2 and realunch it everything works again but as you can guess i cannot constantly do this.

Is there any suggestions or maybe any known solution ?

Toasted 10-06-2017 09:36 PM

When the issue occurs again, Open Device Manager and make sure "Corsair composite ...input device" is under Human Interface Devices and "Corsair Bus" is listed under System Devices.

Is Windows, USB chipset drivers, etc up to date?
What version of CUE are you using?

TerrorBlade 10-07-2017 04:08 AM

Quote:

Originally Posted by Toasted (Post 922452)
When the issue occurs again, Open Device Manager and make sure "Corsair composite ...input device" is under Human Interface Devices and "Corsair Bus" is listed under System Devices.

Is Windows, USB chipset drivers, etc up to date?
What version of CUE are you using?

Hello and thanks for the reply!

Yes both corsair composite...input device and Corsair Bus are listed after the lock and unlock.

Both windows 10 USB chipset drivers and everything else are up to date. ( was the first i thought too ! ) I am using the latest version of CUE 2.18.81

Toasted 10-08-2017 06:13 AM

Try turning off USB power saving features in the UEFI (If available) and Windows and see if that helps.

TerrorBlade 10-08-2017 06:47 AM

Quote:

Originally Posted by Toasted (Post 922597)
Try turning off USB power saving features in the UEFI (If available) and Windows and see if that helps.

Just tried that too... unfortunately didn't help :[pouts:

Toasted 10-08-2017 08:08 AM

You'll want to put in a support ticket with Corsair and see whether they can help if you have not done so already.
https://support.corsair.com/

TerrorBlade 10-08-2017 08:50 AM

no i haven't but i will since it seems there is no one else with a similar problem

TerrorBlade 11-03-2017 06:47 AM

I tried booting in safe mode and there was no problem there. Tried to disable everything that is starting along windows and restarted in normal mode but the problem was still there even thought nothing was running on the background. Any chance anyone can help me figure out how to locate the task/process that is messing/conflicting with the CUE ( i guess ) ? This thing is driving me crazy

Jong 11-03-2017 10:02 AM

I've just raised the same issue in the sticky for the new version, but maybe it's the Windows Fall Update causing it?

TerrorBlade 11-03-2017 10:12 AM

Quote:

Originally Posted by Jong (Post 925299)
I've just raised the same issue in the sticky for the new version, but maybe it's the Windows Fall Update causing it?

Unfortunately i had this issue before the update... as said on safe mode everything seems to work fine

susm4n 11-03-2017 01:43 PM

Same problem after win10 fall update
http://forum.corsair.com/v3/showthread.php?t=171874

MannerRev 11-11-2017 08:22 PM

I also have this problem with profiles not switching on my my K95 RGB after update to Fall Creators Update (FCU) on Win10. Tried all CUE versions from 1.13.xx up to 2.19.xx and none of them fixed the problem on FCU, went back to Creator's Update (CU) and the problem was solved. Still using CUE 1.16.xx because 2.xx unfortunately is laggy and does not provide the powerful features and ease of use that 1.xx had built in.

I tried CUE 2.xx many times before now, and even now to see if it would fix my issue. I might have stayed with CUE 2 if automatic profile switching worked on the FCU, but it seems there's something Microsoft did which breaks all versions of CUE. Because of this, I decided to simply restore a backup from a week ago when I was on CU, and I'm blocking updates to stay on CU and use CUE 1.16.xx.

tanks4nothing 11-11-2017 10:47 PM

Yep same here, wont switch! Been waiting for an update from corsair! Where is it Corsair? By the look of the posts no one has a work around either. HELP!!!

MannerRev 11-12-2017 12:56 AM

Yes unfortunately since the problem spans from V1.x all the way to V2.19.xx, I think there was a major change by Microsoft in the Win10 FCU which broke the method used to by Corsair to detect and switch profiles through all versions of CUE.

Edit: As I said in my previous post the only thing that fixed it for me was REVERTING from the Win 10 FCU (Fall Creator Update) back to Win 10 CU (Creator's Update).

tanks4nothing 11-12-2017 06:45 PM

Quote:

Originally Posted by MannerRev (Post 926043)
Yes unfortunately since the problem spans from V1.x all the way to V2.19.xx, I think there was a major change by Microsoft in the Win10 FCU which broke the method used to by Corsair to detect and switch profiles through all versions of CUE.

Edit: As I said in my previous post the only thing that fixed it for me was REVERTING from the Win 10 FCU (Fall Creator Update) back to Win 10 CU (Creator's Update).

Glad it worked for you, but its Corsairs issue, and I shouldn't have to go back. Besides I like some of the new features in the FCU! I do have a little bit of sympathy for these software companies though, Win 10 has given a lot of them fits with constant updates. But where's Corsair with the customer support? I too put in a ticket, and we will see what comes of it.


All times are GMT -4. The time now is 05:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.