pieter Posted January 11, 2011 Share Posted January 11, 2011 Hi, I just installed a new GS800 PSU in my existing system (Asus P5Qgreen MB, Q8200 CPU). When I power up the PSU (switch on the back), the system immediately comes on (as though the case power switch has been pressed which it hasn't). Also, when I choose shutdown in Win 7, the OS goes through the shutdown, VGA goes dark, but all case fans and PSU are on still on. I have tried disconnecting the case power switch lead from the MB to see if the switch was at fault. No change in behavior. Anything else I can try or do? I am sure this question has been asked already been asked somewhere in the forums, but i couldn't find it after several searches (found one very terse post with a similar question that had no responses). Is there a MM reading I can take on the pins to see if a voltage is present when it shouldn't be? Thanks in advance for the support! -Pieter [uPDATE] - I swapped in an older PSU I had at home and it does NOT exhibit the problem behavior I describe above. Anything else to try before returning? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 17, 2011 Corsair Employee Share Posted January 17, 2011 You may want to try updating the BIOS and then loading setup defaults with the Corsair unit installed. If there is no change, then I would suggest that you get the unit replaced. Request an RMA Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.