alladrios Posted March 27, 2017 Share Posted March 27, 2017 Hello, Suddenly my K95 started a malfuction 2 days ago. Keyboard works fine without the Utility running on the computer but Lighting is on demo. Everything else works just fine. If i Open the Utility keyboard will start connecting and reconnecting Firware won't pass 3% for an update neither image update works. I reinstalled the utility changed USB ports. I had this happened once again but I just changed the polling rate and worked like a charm but now seem to not work properly. Firware 2.05 installed bootloader 0.112017-03-24T09-16-16.log2017-03-24T09-26-43.log2017-03-24T09-31-27.log2017-03-24T09-47-57.log2017-03-26T22-56-13.log Link to comment Share on other sites More sharing options...
Rvh Posted March 27, 2017 Share Posted March 27, 2017 Try and unplug the keyboard, then plug it back in while holding the Delete button. That'l eject the firmware and you can try to flash it again. Link to comment Share on other sites More sharing options...
alladrios Posted March 27, 2017 Author Share Posted March 27, 2017 It didn't work. I formated my PC and the problem it's still here! Link to comment Share on other sites More sharing options...
Comet 1626864951 Posted March 28, 2017 Share Posted March 28, 2017 If you are using a motherboard with the Z97 intel chipset and you are getting Malfunction errors frequently with Corsair K95 RGB, be sure to check the BIOS setting for USB legacy options and see if those options are enabled. If they are, you might try disabling them and see if the Malfunction disappears. Link to comment Share on other sites More sharing options...
Toasted Posted March 29, 2017 Share Posted March 29, 2017 Are you able to test the keyboard on another computer? Does it work fine? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.