EthanOng Posted October 9, 2021 Share Posted October 9, 2021 The LED for my ASUS ROG Strix 3080 O10G V2 was working in iCUE. iCUE was able to detect multiple LED in the GPU. However with the recent update for iCUE to v4.16.194 and Armoury Crate to v4.2.5.0, iCUE only detect my GPU as 1 LED. Anyone facing similar issue? Any solution for this? Link to comment Share on other sites More sharing options...
Ghost_Recon131 Posted October 9, 2021 Share Posted October 9, 2021 Try power cycle the PC, it works around 90% of the time Link to comment Share on other sites More sharing options...
Astral85 Posted October 10, 2021 Share Posted October 10, 2021 Off topic but what is the V2 ROG Strix 3080? Link to comment Share on other sites More sharing options...
Mavyre Posted October 12, 2021 Share Posted October 12, 2021 Hey, I had the exact same issue before. I upgraded Armoury Crate to the latest version, and upgraded the GPU SDK from Armoury Crate. After a reboot, iCue and other lighting software were able to see the 22 LEDs from my ROG 3060Ti v2. Hope it helps! Link to comment Share on other sites More sharing options...
DOTTAT Posted October 12, 2021 Share Posted October 12, 2021 On 10/10/2021 at 5:11 AM, Astral85 said: Off topic but what is the V2 ROG Strix 3080? just gonna guess LHR if asus had a non-lhr out first.... Link to comment Share on other sites More sharing options...
Astral85 Posted October 13, 2021 Share Posted October 13, 2021 12 hours ago, DOTTAT said: just gonna guess LHR if asus had a non-lhr out first.... Quite likely. Thanks. Link to comment Share on other sites More sharing options...
swarfega Posted October 13, 2021 Share Posted October 13, 2021 I have this problem after a recent update of iCue. There are no updates in Armoury Crate though. Link to comment Share on other sites More sharing options...
swarfega Posted October 13, 2021 Share Posted October 13, 2021 I went back to version 4.15.153 and everything is working as expected. With the newer 4.16.194 the 3080 stops working properly and there is no systray icon. Link to comment Share on other sites More sharing options...
DOTTAT Posted October 15, 2021 Share Posted October 15, 2021 On 10/13/2021 at 5:48 AM, swarfega said: I have this problem after a recent update of iCue. There are no updates in Armoury Crate though. good luck getting them to accept that. They still haven't accepted the fact they broke ram control via the plugin about 6 updates back. Just don't update. Shame it's getting to this but they don't listen and they don't care. They simply point the finger at asus. Link to comment Share on other sites More sharing options...
EthanOng Posted October 16, 2021 Author Share Posted October 16, 2021 On 10/10/2021 at 5:11 PM, Astral85 said: Off topic but what is the V2 ROG Strix 3080? Yes, Asus V2 are all LHR version. Link to comment Share on other sites More sharing options...
EthanOng Posted October 16, 2021 Author Share Posted October 16, 2021 On 10/12/2021 at 9:45 PM, Mavyre said: Hey, I had the exact same issue before. I upgraded Armoury Crate to the latest version, and upgraded the GPU SDK from Armoury Crate. After a reboot, iCue and other lighting software were able to see the 22 LEDs from my ROG 3060Ti v2. Hope it helps! This issue happen randomly. Everytime this happen, I had to reboot my computer and sometime it resolve after reboot and sometime it doesn't. Link to comment Share on other sites More sharing options...
ilboss84 Posted October 23, 2021 Share Posted October 23, 2021 Hello to all, I have the same problem, with the addition that when starting the pc the lighting of the platinum dominators stops. They go 1 time out of 5 unfortunately. All updated both Icue and ArmoryCreate. If I disable the plugin from icue the rgb of the ram works perfectly but obviously I lose control of the motherboard and the Strix3080. Link to comment Share on other sites More sharing options...
Zaheen Posted January 24, 2022 Share Posted January 24, 2022 On 10/9/2021 at 7:42 PM, EthanOng said: The LED for my ASUS ROG Strix 3080 O10G V2 was working in iCUE. iCUE was able to detect multiple LED in the GPU. However with the recent update for iCUE to v4.16.194 and Armoury Crate to v4.2.5.0, iCUE only detect my GPU as 1 LED. Anyone facing similar issue? Any solution for this? Hey man, exact same problem you're having. It occurred for me when I did a manual install of Windows 11. It worked completely fine on Windows 10. I have not touched Armoury Crate, I didn't really want to install that but I may have to. I'll be back. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now