Jump to content
Corsair Community

swarfega

Members
  • Posts

    184
  • Joined

Everything posted by swarfega

  1. I went back to version 4.15.153 and everything is working as expected. With the newer 4.16.194 the 3080 stops working properly and there is no systray icon.
  2. Hi Zotty. I have just bought the new Corsair Commander Core XT. Currently I have a Commander Pro installed with two Lighting Node Cores. I would be grateful if you could produce a diagram for 6+2 QL fans connected to the Core XT. Or an alternative is to keep the two QL fans on the H100i SE separate as they are now. They have their own Lighting Node Core. I really want to remove as much RGB devices as I can streamlining whole thing.
  3. I have this problem after a recent update of iCue. There are no updates in Armoury Crate though.
  4. Thanks for the info. I will avoid doing that for a while.
  5. I have two lighting node cores where the usb connector are plugged into the commander pro. They both work with the included profiles but with imported ones only one works. Both show up but one set of lights (6) aren't illuminated.
  6. I uninstalled 3 and removed any residue and it now works. Please re-add the quick lighting colours that were at the top. Those were useful. Also one of my Lighting Node Cores isn't lighting up the LEDs when the other one is.
  7. There's no instructions in that link, its a direct download link.
  8. Mine just constantly crashes on start up so I've gone back to version 3.
  9. It appears version 3.38.61 has dropped. Firmware for Dominator Platinums has also been updated.
  10. I recently upgraded my second PC and interestingly after installing Windows, the LEDs were fine. But as soon as I installed iCue they went out of sync again. I wonder if its a syncing or code issue in iCue.
  11. Thanks for the instructions, worked for me too.
  12. 8 in total. 2 on AIO and 6 QLs. I'm using 2 node cores atm but they're not syncing properly.
  13. Here is my current setup for a 680x case: 6 fans are powered by a commander pro, 2 from the H100 SE Platinum. It has 2 node cores which get power from the Commander pro. The RGB from the H100i fans, three front fans and a bottom fan are controlled from node core 1, the rest are controlled from node core 2. The problem is that any sequential lighting isnt working as whole. What would be the best way to go about this? They are a mix of Corsair QL120 and QL140s.
  14. Here is my current setup for a 680x case: 6 fans are powered by a commander pro, 2 from the H100 SE Platinum. It has 2 node cores which get power from the Commander pro. The RGB from the H100i fans, three front fans and a bottom fan are controlled from node core 1, the rest are controlled from node core 2. The problem is that any sequential lighting isnt working as whole. What would be the best way to go about this? They are a mix of Corsair QL120 and QL140s.
  15. I have 8 fans, 2 on an H100i SE, and 6 case fans. I was wondering if it was more convenient to use two commander pros or continue to use node cores.
  16. Quick question, I know that you shouldn't mix fan models on the same hub. Does the same apply for fan sizese? I am thinking of getting a mix of QL120s and QL140s.
  17. I just downloaded iCue from the website and it downloaded version 3.35.152. Please update!
  18. Managed to get my fault ram replaced via Amazon. All working again.
  19. The ram it self performs well, I hope there is a fix for this via iCue and it would be nice to know if someone is working on this issue.
  20. Thanks for the response. I switched two modules over, and I thought for a split second that it had worked because it lit up properly but then it started doing it again. Will I have to replace the entire kit or just the affected module. I would feel it would be a bit of a waste replacing the entire kit just for one LED.
  21. I just got some Dom Plats 3600MHz 32Gb x4 kit in yesterday and I have one LED with this problem. The odd thing is that iCue is showing the LED as expected. The affected LED on mine is on stick 4 last LED. I wonder if its an issue of timing either on the LED or between the two.
×
×
  • Create New...