k70 lux rgb Buttons from ESC to F11 do not work after replacing other switches

[egoba]

Hi,

I replaced the switches in the keyboard k70 rgb lux mx blue - D, left arrow, right alt,?, Right shift, spacebar.

After assembling and turning on the keyboard, it works normally for about 1 hour, then the keys from ESC to F11 stopped responding to pressing, but they glow.

F12 is working. I noticed that these keys respond on their own.

 

Is it a short circuit? What should I check?

[Corsair Haurjie]

Hi egoba,

 

Please help us understand more by answering the following questions.

 

How exactly did you replace the switches?

 

Did you desolder them and then resoldered some new ones on?

 

And why did you replace the switches in the first place?

[egoba]

Hi egoba,

 

Please help us understand more by answering the following questions.

 

How exactly did you replace the switches?

 

Did you desolder them and then resoldered some new ones on?

 

And why did you replace the switches in the first place?

 

I just soldered and then desoldered

Because I once flooded them a little and they pressed a little worse. But as I wrote above, they do not work from ESC to F11 and I did not touch them.

[egoba]

Hi egoba,

 

Please help us understand more by answering the following questions.

 

How exactly did you replace the switches?

 

Did you desolder them and then resoldered some new ones on?

 

And why did you replace the switches in the first place?

 

 

I measured the pulse diodes of these buttons and one has 0.57V and the rest 0.607-0.615V, can this be a problem?