brunohungaro Posted December 14, 2018 Share Posted December 14, 2018 Hi everyone, sorry my English, I'm Brazilian. I bought a ML 140 PRO RGB kit and did the installation. The fans are working normally, but the LED does not light up. I already added the fans in the Link and still does not light. Has anyone else been through this or can anyone give me some help in resolving this? Thank you very much in advance! Link to comment Share on other sites More sharing options...
DevBiker Posted December 14, 2018 Share Posted December 14, 2018 Check to make sure that all of your connections are tight. The connectors should click into place. Also, make sure that both the Lighting Node Pro and the Fan Hub have direct SATA power (no adapters). From there, try rearranging the fans on the hub. The fans operate in series so one bad fan can take them all down. And make sure that you have the correct Lighting Channel configured in iCUE for the fans. Link to comment Share on other sites More sharing options...
brunohungaro Posted December 14, 2018 Author Share Posted December 14, 2018 I tried it in every possible way and it still does not turn on the LEDs. Can I have something broken? or any specific configuration to be made on the motherboard? Link to comment Share on other sites More sharing options...
DevBiker Posted December 15, 2018 Share Posted December 15, 2018 Can you show us your iCue configuration screen? Link to comment Share on other sites More sharing options...
Recommended Posts