MikeyR Posted July 26, 2018 Share Posted July 26, 2018 (edited) Hello, This is regarding Corsair Vengeance RGB Pro After the update to v 3.5.111 from 3.4.95 Before I was able to set one dimm to sequential and the LED effect will have same speed as before. After the update the LED speed will slow down a lot and look kinda laggy unless all 4 dimms runs sequential mode. I liked the when it ran fast, because I could do some awesome effects where each dimm had it's own sequential effect and it will just look cool. You can find a video I recorded of the "laggy" effect here -> https://photos.google.com/share/AF1QipNpSl_wmAzrEmGH-U42xSznxZl2XQR2MlDxCZ7gr7NhN62rvBTWyRJf3jgMROnp1Q?key=WnVDdVdwaWdTQVppTjNuXzB5NmRDWFpuZzB5d3dB It's actually so bad (not recorded in the video) that when I use sequential on dimm 1&2 and new sequential 3&4 then dimm 2&3 are out of sync of each other. In the previous version they both ran smooth as **** and visually in sync. Edited July 26, 2018 by MikeyR Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted July 26, 2018 Corsair Employee Share Posted July 26, 2018 Interesting, we didn't change anything for the memory from one version to the other. I will investigate this. Link to comment Share on other sites More sharing options...
MikeyR Posted July 27, 2018 Author Share Posted July 27, 2018 Awesome, please let me know if you need any more information from me? Is there an easy way to roll back a version, without getting my settings cleared? Because then I will be able to provide more videos on how it worked pre-update. Thanks for investigating, please let me know if you find out more! Link to comment Share on other sites More sharing options...
LastAngryMan Posted July 27, 2018 Share Posted July 27, 2018 (edited) Hi, I am having similar problems since updating to 3.5. I am having problems when using color shift (lightning link) across Corsair devices. The other devices all display the correct color but my Vengenance Pro RGB is out of sync with the rest of the devices. Video Edit: Sorry I am having problems getting this url to diplay correctly https://photos.app.goo . gl/K5EKfx1JM5Pnx3ru8 My other devices are: H150i K70 Mk.2 RGB 3 x Corsair RGB LL 120mm fans connected to Commander Pro If you need any more information then let me know. Thanks Edited July 27, 2018 by LastAngryMan Correct URL link Link to comment Share on other sites More sharing options...
MikeyR Posted July 28, 2018 Author Share Posted July 28, 2018 Hi, I am having similar problems since updating to 3.5. I am having problems when using color shift (lightning link) across Corsair devices. The other devices all display the correct color but my Vengenance Pro RGB is out of sync with the rest of the devices. Video Edit: Sorry I am having problems getting this url to diplay correctly https://photos.app.goo . gl/K5EKfx1JM5Pnx3ru8 My other devices are: H150i K70 Mk.2 RGB 3 x Corsair RGB LL 120mm fans connected to Commander Pro If you need any more information then let me know. Thanks Yeah I'm also having issues with google short link, they get posted wrong in this forum. My work around was to click on the image and sent the URL I had in my omnibar (where you insert urls). So for your link I will use this https://photos.google.com/share/AF1QipOKCDymfDB6JZkcbrlEPV_nz_n3bwVIvVVUcuWp0fQ6JO1UTOzs14ZXxSYBxKZYGw?key=U0NaYjFyUDVJRVhuOXctOXZBNEhuUmFkRXIzMzl3 Link to comment Share on other sites More sharing options...
MikeyR Posted August 14, 2018 Author Share Posted August 14, 2018 Today I've updated iCUE to v. 3.6.109 and also there was a firmware update for my memory (now running v.0.95.51) but the lag issue when using a color mode on less than all dimms is still present. Any news on the process of fixing it? Link to comment Share on other sites More sharing options...
MikeyR Posted August 23, 2018 Author Share Posted August 23, 2018 Any update? Link to comment Share on other sites More sharing options...
MikeyR Posted August 29, 2018 Author Share Posted August 29, 2018 Should I create an issue regarding this bug? Link to comment Share on other sites More sharing options...
MikeyR Posted September 29, 2018 Author Share Posted September 29, 2018 The newest update v3.7.99 kinda fixed the issue, you are able to turn software control of the RAM modules, so you can control every single LED inside the module. The only issue is that I can't seem to get my old sequential mode, where the two outer went down and the two middle went up, but with synchronised colors. So it goes outer green, inner green, outer red, inner red, Now it is just random mess of colors when doing random, I guess the algorithm is true random :D Link to comment Share on other sites More sharing options...
BlueDevilSteve Posted September 30, 2018 Share Posted September 30, 2018 The newest update v3.7.99 kinda fixed the issue, you are able to turn software control of the RAM modules... am I the only one whose update to 0.95.51 keeps on failing? iCue itself is successfully updated to 3.7.99 Link to comment Share on other sites More sharing options...
suashm Posted November 1, 2018 Share Posted November 1, 2018 am I the only one whose update to 0.95.51 keeps on failing? iCue itself is successfully updated to 3.7.99 Hi, you're not the only one. When I click on the update button, it says updating to 0.0.26 and just sits there doing nothing. It's pretty disappointing given the price of this RAM. Link to comment Share on other sites More sharing options...
Mussels Posted November 7, 2018 Share Posted November 7, 2018 my ram wont update either - on an Aorus motherboard, you guys wouldnt have the same brand would you? Link to comment Share on other sites More sharing options...
MikeyR Posted January 2, 2019 Author Share Posted January 2, 2019 The issue seems to be fixed with Memory Firmware v. 0.96.57 and ICUE software v. 3.10.125 Link to comment Share on other sites More sharing options...
Mussels Posted January 3, 2019 Share Posted January 3, 2019 On Aorus x370 my issues were fixed with the BIOS update that included agesa 1.0.0.6 Link to comment Share on other sites More sharing options...
Kinslayer1979 Posted February 13, 2020 Share Posted February 13, 2020 I still seem to have issues synchronizing my memory with my Corsair LL120 fans and my motherboard RGB. The fans and the motherboard (Asus RoG strix z270f) are ok but my memory just gives up after 5 minutes. I 've tried it with JackNet RGB Too but that did not help either. Does anyone have an idea to help out? Link to comment Share on other sites More sharing options...
Recommended Posts