Astral85 Posted April 6, 2018 Share Posted April 6, 2018 Received this in iCUE for the first time today after uninstalling some software. Am I the first to report this in iCUE? Link to comment Share on other sites More sharing options...
solarity Posted April 6, 2018 Share Posted April 6, 2018 Could you provide more details on what devices you have, etc? Yesterday I was working on my system and I noticed my strips and fan lights weren't working. When I was doing some wire management, the USB connector came unplug. I plugged it back in and it worked. I think I might have seen an issue where it didn't detect my keyboard months ago in the old Cue, but I think I only saw that once or twice and it fixed itself. Did you try a reboot or unplugging your device, if it is a keyboard/mouse? Link to comment Share on other sites More sharing options...
Astral85 Posted April 6, 2018 Author Share Posted April 6, 2018 @solarity I have a Sabre (mouse), H110i and LNP. All I did was uninstall some Asus software and on the next boot I got the no device detected error and none of the devices were detected. I may have rebooted again with the same error I can't remember but what I did next was exit iCUE completely (probably shutting down the service with it) and restarting it which seemed to restore the devices. I was no where near any cabling so I have no idea what caused this. At least it's back to normal for now.. Link to comment Share on other sites More sharing options...
DevBiker Posted April 6, 2018 Share Posted April 6, 2018 It's possible that you uninstalled some USB drivers when you uninstalled the Asus software. From there, Windows may have picked up the devices, downloaded the drivers and reinstalled ... this would certainly explain the behavior that you describe. Link to comment Share on other sites More sharing options...
Zyankali Posted April 6, 2018 Share Posted April 6, 2018 Got the Same Problem Yesterday it worked fine, since Today Icue dont detect my Corsair Vengance and my Lightning Node Pro. So i Deinstalled Icue so i could Change Colors via Link. Then i tryed to Install Icue Again, at the Point "starting Service" at 60% it Stops with an Error. Now i Cant Deinstall it anymore and Link says "This Device is controlled by Icue" What can i do now? Icue got somewhere else some Data i need to Delete? Link to comment Share on other sites More sharing options...
DevBiker Posted April 6, 2018 Share Posted April 6, 2018 The registry key HKEY_LOCAL_MACHINE\SOFTWARE\Corsair\Corsair Utility Engine\CLinkPids controls what devices Link turns over the iCue. If you remove that key, you'll restore control to Link. You will, however, need to make sure that you fully uninstall iCue. You may need to go down the manual route to remove the MSI registration from the Windows Installer database and make sure that the Corsair Service is disabled or you will wind up with conflicts and issues. Link to comment Share on other sites More sharing options...
Zyankali Posted April 6, 2018 Share Posted April 6, 2018 Thanks deleting the REgistry helps to get Link Work again. Where can i check if Corsair Service is disabled? Link to comment Share on other sites More sharing options...
DevBiker Posted April 6, 2018 Share Posted April 6, 2018 That would be in your services Control Panel applet. Link to comment Share on other sites More sharing options...
Astral85 Posted April 7, 2018 Author Share Posted April 7, 2018 It's possible that you uninstalled some USB drivers when you uninstalled the Asus software. From there, Windows may have picked up the devices, downloaded the drivers and reinstalled ... this would certainly explain the behavior that you describe. That sounds completely feasible. ;): Link to comment Share on other sites More sharing options...
dw007 Posted April 7, 2018 Share Posted April 7, 2018 disconnecting and reconnecting the usb worked the first time but not now? Link to comment Share on other sites More sharing options...
BirdOfBlueJays Posted July 15, 2020 Share Posted July 15, 2020 I am having the same issue, though restarting my pc does not do anything. I've tried replugging USBS, repairing the engine and none of them work. Please help! Link to comment Share on other sites More sharing options...
UniCizin Posted July 17, 2020 Share Posted July 17, 2020 same here with K57 wireless ... Link to comment Share on other sites More sharing options...
msquibb Posted July 18, 2020 Share Posted July 18, 2020 Just started here as well, K95 RGB Platinum. Have restarted, changed USB ports, reinstalled iCue, no luck. Link to comment Share on other sites More sharing options...
buttsmith Posted July 22, 2020 Share Posted July 22, 2020 https://forum.corsair.com/forums/showthread.php?t=198424 This is what worked for me so far. Link to comment Share on other sites More sharing options...
BirdOfBlueJays Posted July 24, 2020 Share Posted July 24, 2020 Didn't work for me, I just hope Corsair fixes this issue overall and we all pull through. Link to comment Share on other sites More sharing options...
Blacksad Posted August 2, 2020 Share Posted August 2, 2020 Hey there. I had this same issue today. I deleted some unnecessary Asus programs, and it sent Icue into a tailspin where it would say "No Devices Detected", and abruptly close over and over. I had uninstalled/reinstalled Icue multiple times, as well as Aura Sync. What ended up fixing it was going in and completely deleting the "plug-in" folder under Icue. Then go to "Add or Remove" programs in Windows. Select Icue, but don't uninstall it. Instead, hit the "Modify" button, and then choose the "Repair" option when it prompts you to Uninstall or Repair. Worked for me. I'd been having trouble getting Icue to both change any lighting on my Asus Motherboard, and then later wouldn't even detect it. So, it fixed that problem as well! Hope this helps! Link to comment Share on other sites More sharing options...
Tyrian01 Posted August 20, 2020 Share Posted August 20, 2020 Hey there. I had this same issue today. I deleted some unnecessary Asus programs, and it sent Icue into a tailspin where it would say "No Devices Detected", and abruptly close over and over. I had uninstalled/reinstalled Icue multiple times, as well as Aura Sync. What ended up fixing it was going in and completely deleting the "plug-in" folder under Icue. Then go to "Add or Remove" programs in Windows. Select Icue, but don't uninstall it. Instead, hit the "Modify" button, and then choose the "Repair" option when it prompts you to Uninstall or Repair. Worked for me. I'd been having trouble getting Icue to both change any lighting on my Asus Motherboard, and then later wouldn't even detect it. So, it fixed that problem as well! Hope this helps! Signed up just to say thank you & this fixed the problem! Link to comment Share on other sites More sharing options...
BirdOfBlueJays Posted August 22, 2020 Share Posted August 22, 2020 Ok, update: The only way I found to get it working again was to give my computer a fresh start. It might be harsh, but it worked. Link to comment Share on other sites More sharing options...
Capnlanky Posted December 29, 2020 Share Posted December 29, 2020 hey there. I had this same issue today. I deleted some unnecessary asus programs, and it sent icue into a tailspin where it would say "no devices detected", and abruptly close over and over. I had uninstalled/reinstalled icue multiple times, as well as aura sync. What ended up fixing it was going in and completely deleting the "plug-in" folder under icue. Then go to "add or remove" programs in windows. Select icue, but don't uninstall it. Instead, hit the "modify" button, and then choose the "repair" option when it prompts you to uninstall or repair. Worked for me. I'd been having trouble getting icue to both change any lighting on my asus motherboard, and then later wouldn't even detect it. So, it fixed that problem as well! Hope this helps! thank you! Link to comment Share on other sites More sharing options...
Recommended Posts