DRivas94 Posted July 23, 2019 Share Posted July 23, 2019 Hey guys, I installed my Commander Pro last week and hooked up all the fans and developed curves off of temperature sensors I have throughout the case. I recently added one to measure intake air temperature (ambient air temperature) and it was reading unusually high. I decided to look into if further thinking my house AC system was just not balanced, but I had a Fluke laying around and tested what the sensors were reading vs what the Fluke sensor read and found that all my Commander Pro temperatures are reading around 3 degrees C high (the probes from the fluke were placed immediately beside the commander pro sensors). The voltages the commander pro is reporting are right on the money (12V is reading ~12.04V, 5V is reading ~5.05V, 3.3V is reading ~3.40V). Has anybody run into this problem or have any ideas on what's going on? Thanks in advance! Link to comment Share on other sites More sharing options...
DevBiker Posted July 23, 2019 Share Posted July 23, 2019 Question - is there any lighting connected to the Commander Pro? If so, what kind? Link to comment Share on other sites More sharing options...
Recommended Posts