christizzz
Members-
Posts
15 -
Joined
Reputation
10 Good-
Corsair RMX 750 Fan: Load or Temperature ?
christizzz replied to christizzz's topic in Build Hardware Troubleshooting
thank you for your reply... my spec were not updated sorry... so whats hapening is normal ? the new case is the Bequiet 500DX and it does have vents in the PSU Shroud... but wouldnt the PSU be taking hot air when the GPU is under load ? -
Hello, The manual of the Power supply ( and on the box)... shows a Load-Fan RPM curve. The curves shows that the Fan trigger @300W of Load. Now the PC on idle does even get close to 200W... I have an R7 3700X ( not overclocked) and GTX 1070 ( also not overclocked)... THe PSU is silent.... however afte like 45min-1hour of light usage (internet browsing, text editing...) the PSU fan do kick in. It is not loud, its just i can hear it because my other fan cases are noctuas running @ 300-400RPM... so when the PSU fan kicks in i can hear a slight "wooosh"..again it is not annoying. but ia m confused because the box AND manual sates that the fan will kick in at 300W. The PSU fan will run for like 10-15min... and then stop... and again an hour late they will kick in again... The PSU is mounted with the fan facing down because i have a case with a filtered bottom.. the room temperature is 22-23C degrees. Am i missing somehting ? the PSU is like 2 weeks old...
-
same problem after upgrading from asus Z170 to asus b550
-
K65 - Can't save static lighting profile to hardware memory
christizzz replied to Aemstel's topic in iCUE Software
same issue with my Strafe keyboard... i am also pretty sure this used to work -
same issue..getting the error on restart/shutdown
-
Hello, I cant save the a static lighting profile to my k70 strafe keyboard... the small sd card icon doesnt do anything anynore... i am pretty sure this used to work..since i am running a old static profile... Did corsair remove the feature ??
-
iCUE 3.24.52 causes BIG Problems // Harpoon Double Click Workaround
christizzz replied to StickyTB's topic in iCUE Software
Hello i would also be interested in the old firmware of the mouse... its is registering double clicks too since the update.... -
I have exactly the same issue with my harpoon... it started registering double clicks after the Mouse firmware update...
-
New iCue "Freezes" and requires constant CorsairService restart
christizzz replied to Rakshasas's topic in iCUE Software
this software is a plague. SO i sold my h100i v2 and kep only my strafe keyboard , harpoon mouse and LED strips. I am not getting the "dashbaordfreeze" anymore BUT the usb disconnect sound is there, the side buttons of the mouse randomly stops working... i need either to REpair icue, restart my pc OR unplug and plug the devices back. PS: if i close icue the side mosue buittons will work again but then i ll lose my lighting profile. This is getting ridiciulous. The latest update didnt do a thing. -
New iCue "Freezes" and requires constant CorsairService restart
christizzz replied to Rakshasas's topic in iCUE Software
Yep...i just sold my h100i v2 and got a noctua cpu cooler...way more reliable... i dont think the issue is gona be resolved... it has been like this for a year now... the support rarely replies and when they do, they go through standard protocol, Log files, maybe its another software fault ...blabla.... -
New iCue "Freezes" and requires constant CorsairService restart
christizzz replied to Rakshasas's topic in iCUE Software
Same problem.. And i am prettyy sure the disconnect device "disconnect sound" some users are reporting ( me included) when Icue starts autom,atically or manually after a restart is also related to this issue. for now i defined all my static lighting to be saved on device ( except my harpoon mouse) and i completely closed icue and disbaled the start with windows button. I have the following: *h100i v2 --> static light plus custom ciurve for fans --> saved on device *2 rgb LED strips with RGB node pro --> static lighting defined on device *Corsair starfe silent --> static defined on device *Wireless harpoon mouse --> cant define it on device. When the "service" hangs the following doesnt work: *The monitoring --> curves and valuies are not refreshed and remain constant *Changing the profile for the h100i v2 doesnt work --> lighting and curves does not apply. -
Hello, so i have been using Corsair LInk with my h100i v2 cpu cooler for a year with no problems. I bought a the harpoon mouse and the strafe keyboard and LED RGB node a week ago and switched to ICUE to control the corsair components. everything works perfectly but i am getting a "device disconnect" notification sound when PC restarts... but everything seems to be working... now i am pretty sure its the icue software since when disabled/uninstalled.. i am getting no disconnect sound. is this a software bug ? any solution ? Thank you