overclockquad Posted December 27, 2009 Share Posted December 27, 2009 Ok so obviously as Happy Holidays! jsut passed, i got some new ram, (TW3X4G1600C9DHX) 4 gb 1600 mhz pc 12800 1.8v 9-9-9-24 so my cpu is at 400fsb with a mult of 8 =3.2ghz... my ram works properly when its at 1:1 or 800mhz, if i try to move it up at all, the system wont even start, and even now im having issues getting into bios, system starts and powers off two times before powering on for real... but if i bump up the MHZ on ram i cant even get passed the 2 semi start ups... my volts are as follows, cpu@1.30 mem@1.79 fsb term@1.20 NB@1.25 SB@1.50 also currently my clocks for mem are at fsb:dram = 5:6 cl 7 trcd 7 trp 7 tras 19 trfc 54 command rate 1t any help would be SAWEET! :feedback: thanks :D: Link to comment Share on other sites More sharing options...
overclockquad Posted December 30, 2009 Author Share Posted December 30, 2009 i gotta bump this thread.... Link to comment Share on other sites More sharing options...
Yellowbeard Posted December 30, 2009 Share Posted December 30, 2009 Post screenshots from CPU-Z for both the SPD and MEMORY tabs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.