View Single Post
  #2  
Old 06-01-2018, 07:51 AM
DevBiker's Avatar
DevBiker DevBiker is offline
CORSAIR Beta Team
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 8,679
POST ID # = 956964
DevBiker Reputation: 94
Default

A couple of things to look at ... and somethings that you may need to rewire as it doesn't sound like it's installed correctly ... something that we've seen before in cases like this.

First, your cooler will have a single fan header cable coming off of the header. This will be a standard, 3-pin fan header. Where is that plugged in to your motherboard? It should plugged in to the CPU_FAN header on your motherboard. Once it is, you'll also need to go into the BIOS and make sure that the CPU_FAN header is set to 100%/Full Power. You can also set it to PWM mode.

Second ... the 2 fans for the radiator should be plugged in to the Y-splitter that comes off of the pump header. This will allow the fans to be controlled by the pump. Once that's done, go into Corsair Link and set the fans on "Balanced" mode and make sure that the temperature source for the fan curve is set to "H100i V2".
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
AIO FAQ | RGB FAQ |
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote