Thorrior

Ich hatte mir zuerst nur die LL-Lüfter besorft und dann nach dem Einbau gemerkt, dass ich bei den Lüftern, die vorne eingebaut waren, den inneren Ring nicht sehen konnte. Deshalb habe ich alle Lüfter nochmal als QL neu gekauft. Sonst hätten es für mich auch die LL getan. Aber hinterher ist man immer schlauer.

Die QL-Lüfter haben aber auch mehr LEDs als andere Lüfter. Außerdem kann man beide Seiten, sowie Innen- und Außenring separat ansteuern. Ich denke mal, dass das den Preis ausmacht. Was mich persönlich nervt ist, das bei jeder Lüfterserie andere Controller verwendet werden. Ich habe QL-Lüfter für das Gehäuse und LL-Lüfter am Radiator. Dazu noch den Commander Pro und der Kabelsalat ist perfekt.

Die Aufkleber meiner 4 QL-Lüfter sind auch nicht ganz mittig. Sieht ein bisschen doof aus, aber technisch sind die alle okay. Ich bin da nicht so empfindlich, aber ich kann verstehen, wenn es dich stört.

Not sure if this will fix your problem, but there is an option in HWInfo that you can try to turn off. Under Program/Settings in the Safety tab is an option CorairLink and Asetek Support. Turn this off and see if it fixes your problem with the AiO. I have the same AiO and I just updated the firmware. No problems so far. But I had another problem with iCue not being able to reade the correct fan speeds on my commander pro. Turning this feature off helped,

Hallo NiklasT es gibt auch ein deutsches Supportforum. Vielleicht stellst du deine Frage dort noch mal. https://forum.corsair.com/v3/forumdisplay.php?f=192

I received a new kit 2 x 8 GB this week. All LEDs work perfectly so far. I'm happy now :)

That's it. I installed HWInfo64 today because I've got a Ryzen 9 5900X since today and MSI Afterburner didn't show the clock frequency of the new CPU. After closing HWInfo64 and restarting the iCue service I can see the fans and the correct RPM values. Thank you so much! I thought the Commander Pro had a problem and I had to RMA it and do the cable management again :)

Hello, I've got a problem with the commander pro. I've got 4 QL 140 fans connected to the commander pro for RPM control. In iCue the fans do not always show up in the commander pro tab. Sometimes I can only see 2 of them, then they all appear and sometimes I can see none of them. One of them, when it appears, shows 12000 RPM. But it's not always the same fan. This seems totally random. The fans are all spinning though. I just can't control them anymore. Everything is connect correctly and it was working before. But I can't say when this problem occurred, because I haven't checked it for a while. Anyone got an idea what this could be? I have rebooted the PC a few times but it didn't help. Firmware and iCue are all updated to the latest version.

That's pretty disappointing for memory that is more on the expensive side. My replacement kit is scheduled for the end of November. Let's hope I'll get a good kit. By the way, my problem started with one LED not working properly. Now it's 2 LEDs on the same stick already. Once I was able to fix it with restarting the service but that is not working anymore.

Ach, ist die Capellix endlich verfügbar? Leider 2 Wochen zu spät für mich :(

I have contacted Amazon. They are going to send me a new kit.

I'd like to know that, too. I just built a system with a commander pro, RGB hub and a lighting node core. Cablemanagement was difficult to plan, because I couldn't try out where to put all the iCue devices as I didn't want to use up all the tapes.

I forgot to mention that I have two 16 GB kits CMT16GX4M2C3200C16.

Hi all, I just finished my new AMD build with many Corsair components and I've got exactly the same problem as many others here. One of the sticks has a faulty LED. It seems the LED only displays green and blue but not red. So I get any color variations that doesn't include red. Here is a picture where I set the color red on 2 of the sticks. P.S. My desk still looks pretty chaotic. But I'm literally just done with the build.

Wie kann ich eigentlich meine Bestellung für die Capellix stornieren? Ich habe ja jetzt die Pro XT gekauft, weil ich den Rechner endlich fertigstellen wollte.