Vini Rust
-
Posts
10 -
Joined
-
Edit: Was reading the manual for the non-WiFi version, mine have two 12v RGB XD But the software shows 2 RGB headers zones, and I'm pretty sure my board have 1 12v rgb and 1 5v rgb headers.
-
That's the thing, The RGB from the pump of Galahad AIO and the stock radiator fans can be connected to the ARGB header of the motherboard IIRC, so will I be able to control them, I saw that the MoBo tab in the iCUE software have 2 RGB headsets as spots for light effects, but I'm not sure if it's ok to do what I want, and even if it's, will it work as an 1 LED or like a proper ARGB which can be addressed different colors to each LED (making the effects)?
-
Sorry for resurecting this post, but I'm wondering, will I be able to control the Galahad 360 pump RGB, and if possible the stock fans (they be the pulling fans, from my push'n'pull, since I have 9 unifans that'll be in the front for sure) through iCUE? I mean, I control my MoBo lighting thorugh there, and the AIO will arrive soon to take the place of my NH-U12S (I'm doing a yolo mcgaiver with this heatsink bending my side glass from the case, so, after 3 months, I think it's time to upgrade).
-
Care to share the GPU model? Does any RGB Asus GPU works fine with iCUE?
-
Thanks! Sadly, when I was going to buy it, it sold out, what a lucky guy am I, huh?
-
One last thing (already bought the LL140 twin, should arrive till Saturday), will a QL120 work with the 2 LL140 and the SP120 PRO on the same hub? There's no LL120 available in Brazil, only 140s, and the only others Corsair RGB options are the SP120 and QL120. I wanna use the QL on the back exhaust, since that is the most visible place on the 175R case, and the SP120 doesn't have ring LEDs, which I most like. The final result would be the QL120 on the rear exhaust, the 2 LL140 on top exhaust and the SP120 PRO in front to light up the Corsair logo on the case. If would be turned on like an intake fan, but since the front air entrances are sealed, I don't think it would matter much.
-
How many fans can I attach to the hub? I will have 4 in total. The 2 LL140 will be top exhaust, the SP120 PRO will be rear exhaust (there's no LL120 available in Brazil, at all), and the fan that comes with the case will be placed back in the front (but this one doesn't matter, since it uses standard RGB 12v 4-pin connector). Btw, the front one will not have much use, since I didn't remove the front plastic seals because I live close to the beach, so I don't want that kind of air being pushed inside my rig, let it flow passively. Man, really thanks for all the support, I was lost when I discovered this storm of RGB information.
-
Will this kit work? It says Lighting Node PRO, isn't it supposed to use for lighting strips?
-
So, HD140 hub is different from the one that allows iCUE software integration? That explains the "low" price here on Brazil, thanks man.
-
Hi guys, dumb one here! I couldn't understand Zotty's FAQ so I'll post it here: My parts just got here, and I didn't paid attetion before choosing them, so turns out I can't turn the SP120 RGB on without a Corsair hub, therefore, I'm about to buy the HD140 Twin kit with the RGB hub, will I be able to make it work? If so, will it be recognized by the iCUE software? I don't really care about software implemantation since I'll set it to static colors, mainly one being yellow to match my KB, and black, gray yellow Batman theme. I also am using the stock fan that comes with the case, only exhaust setup, and with the HD140, either I'll give the stock fan to a friend or either I'll place it back in the front, where it came pre-installed.