Zotty Posted February 4, 2019 Author Share Posted February 4, 2019 a thing of beauty. thanks! It is isnt it.. the Guy did well :) Link to comment Share on other sites More sharing options...
RoflCopter726 Posted February 4, 2019 Share Posted February 4, 2019 It is isnt it.. the Guy did well :) Thanks for the kind words guys, I have to give thanks to Zotty and DevBiker as well for advice and their guides they've written up. Link to comment Share on other sites More sharing options...
Pirothea Posted February 4, 2019 Share Posted February 4, 2019 i would power the fans you have on the Radiator from the cooler... this would ensure the coolers correct operation regardless of software etc... Thank You for the advice Link to comment Share on other sites More sharing options...
Zotty Posted February 4, 2019 Author Share Posted February 4, 2019 Thank You for the advice no worries man :) Link to comment Share on other sites More sharing options...
simplyshredded Posted February 8, 2019 Share Posted February 8, 2019 Zotty my man, in regard to option 2. With iCUE/Link Control and also adding a Corsair Pro Lighting Expansion Kit. I am looking to have this configuration but with LL120 fans. Since the case logo is recognised as an SP120 fan, im assuming I cant use the rgb splitter with a LL120 fan and the case logo. So my question is, do you know if I can use the splitter to split 2 L 120 fans and have the case logo plugged into its own seperate port into the rgb controller? If so, where I am I able to obtain this rgb splitter? Thanks for your help again http://i.imgur.com/sdFj6rAl.png Pretty Isn't it :) Hi guys.. Setup is the same for the normal 570x just minus the RGB Case lighting (psu shroud and Sails logo) Firsty. Go read this Corsair RGB Hardware Ecosystem FAQ Thead Covers most things You need to know on how the system works. Don't Skim read it.. take Your time.. there is a lot to take in. Also watch the Corsair How videos for iCUE Setup and Operation My Discord Channel for Corsair Case owners https://discord.gg/b6x8HpM -------------------------------------------------------------------------------------- when you get the case. this is how it is set up internally. http://i.imgur.com/HaAXDQjl.png. --------------------------------------------------------------------------------- Taking things further now should you decide to add more SP RGB Fans and also want to Software Control with iCUE this would be your next Step this would include both RGB and RPM control of upto 6 SP120 RGB Fans and also the RGB of the Case Logo's http://i.imgur.com/7HL8Ibbl.png You could use a Lighting Node Pro but this would be at the Cost of the Rpm control of your fans. would be RGB control only. -------------------------------------------------------------------------------------- And a little Further As You Will have noted. you need to have a second RGB Fan LED Hub added in for your Case Lighting. (Corsair Logo's). The Case Ligthing is added into the Chain as a Single SP RGB Fan. this is how it is Added in iCUE/LINK and detected by the SP Button Controller. Now You can 'Fiddle' the system to drop one of the RGB Fan LED Hubs by use of a Custom Cable that would be used at Your own risk.. This is a user modification and only for use with the Mirror Black case lighting and Sp RGB Fans.. DO NOT BREAK THIS RULE!!!. also to be noted. when set up this way.. in iCUE/Link you would not set the Case Lighting. it will just be mirroring what Fan number 1 is doing (the SP120 RGB Fan Plugged into port 1 of the RGB Fan LED Hub) the Setup would look something like this 1. No Software Control. http://i.imgur.com/zziWck0l.png 2. With iCUE/Link Control and also adding a Corsair Pro Lighting Expansion Kit http://i.imgur.com/tClqBcHl.png 3. further changes include adding an AOI and and PSU into Your Corsair iCue Ecosytem. http://i.imgur.com/Q0y5XAVl.png --------------------------------------------------------------------------------- Re:' The Custom Splitter Cable/Connector. this you can make your self by simply making a simple 'Y' connector with 2 female and 1 male connector. more on cable making here DevBikers Cable Repair/Modification/Making Work Shop He Really is the Cable Guy Round these parts :) The cable it's self would look something like this (Prototype) http://i.imgur.com/WS2fG2fl.jpg Again I must Stress!. this is NOT Endorsed or Supported by Corsair.. these are User Modifications and as such ALL at YOUR own Risk guys! And here is a diagram using LL fans http://i.imgur.com/9XIrL5Ul.png I'll add further info to this over times as questions get asked :) Thanks for reading and Please Rate the thread at the top of this page if it helped.. -------- Link to comment Share on other sites More sharing options...
Zotty Posted February 8, 2019 Author Share Posted February 8, 2019 hey bud.. nope.. cant have those logos on the same RGB Fan LED Hub as the LL fans... you would with out a doubt need 2 RGB Fan LED Hubs unfortunately... you can get away with mix and matching LL/HD/ML fans (plays hell with synchronised/sequential effects though) but NOT SP RGB Fans buddy Link to comment Share on other sites More sharing options...
simplyshredded Posted February 9, 2019 Share Posted February 9, 2019 Damn how annoying... I really like having a diff color for case logos, but dont want to plug in an extra node pro for some strips.... dont have any room left and would also need an extra sata power cable :confused: hey bud.. nope.. cant have those logos on the same RGB Fan LED Hub as the LL fans... you would with out a doubt need 2 RGB Fan LED Hubs unfortunately... you can get away with mix and matching LL/HD/ML fans (plays hell with synchronised/sequential effects though) but NOT SP RGB Fans buddy Link to comment Share on other sites More sharing options...
Nazgarth Posted February 14, 2019 Share Posted February 14, 2019 (edited) Hello, I was wondering if you could help me with a set up I want to make with 570X case and corsair components. I have modified an img provided in OP. Will this work? or should I ignore the 3 fan control/power connectors that come from H150i (that would normally be used for ML fans), and plug the 3 fans cooling H150i into the Commander PRO? Any help would be appreciated, thanks. Will remove image if its wrong. Edited February 14, 2019 by Nazgarth trying to get img to work Link to comment Share on other sites More sharing options...
Zotty Posted February 14, 2019 Author Share Posted February 14, 2019 Hey buddy... yep.. that works Link to comment Share on other sites More sharing options...
Nazgarth Posted February 14, 2019 Share Posted February 14, 2019 ok, many thanks. Link to comment Share on other sites More sharing options...
Podgy Posted February 16, 2019 Share Posted February 16, 2019 Hey, I've got just the normal Corsair 570x Black case, and recently upgraded to the H100i RGB Platinum, and decided to replace the 3 front SP fans with ML120 Pros and my rear exhaust SP fan with a ML120 fan also so I'm running all the same fans. How do I connect these correctly with the current FAN LED controller that came with the 570x case and the added Lighting Node that comes with the ML series. Thankyou. Link to comment Share on other sites More sharing options...
Zotty Posted February 16, 2019 Author Share Posted February 16, 2019 Hi Buddy. Have read of the Below linked thread. covers the Corsair RGB Ecosystem in detail including device specs and set up diagrams. http://forum.corsair.com/v3/showthread.php?t=173880 that should help you work out how to do it.. as long as you follow the rule of not mixing fan types on the same RGB Fan LED Hub you will be fine ;) Link to comment Share on other sites More sharing options...
Podgy Posted February 16, 2019 Share Posted February 16, 2019 okay so my understanding is, connect the 6 ML fans to the Fan Led Hub, the Fan Led Hub to the Lighting Node and connect the Lighting Node via USB and SATA? and this will only control the RGB? If i want to control the RGB & RPM i will need to replace the Lighting Node with Commander Pro? Link to comment Share on other sites More sharing options...
Zotty Posted February 16, 2019 Author Share Posted February 16, 2019 you got it buddy :). spot on Link to comment Share on other sites More sharing options...
Podgy Posted February 16, 2019 Share Posted February 16, 2019 okay awesome thankyou! the h100i rgb platinum fans will be controlled via the cooler itself yes? just the other 4 fans will not be controlled via iCUE Link to comment Share on other sites More sharing options...
c-attack Posted February 16, 2019 Share Posted February 16, 2019 With the other 4 fans on a Commander Pro and the 2 on the H100i's splitter, all will be controllable through iCUE. The C-Pro connected cases fans through that device tab and the radiator fans through the H100i tab. You could put the 2 radiator fans on the C-Pro as well, but there really isn't a good reason to do so - most of the time. In the event of some wiring calamity, the cooler will protect itself, spinning fans up etc. If you try to run from coolant temperature from the C-Pro without the software running, they won't know what to do. That would include boot/restarts. On the cooler's fan controller they will follow their directions. Link to comment Share on other sites More sharing options...
craigbrown Posted February 20, 2019 Share Posted February 20, 2019 Thanks for all this great info! I have the Mirror Black case with the H100i Platinum cooler. I melieve the fans are ML120. I think the fans are being controlled by the cooler. I want to replace the front fans with LL120's. I understand that the hub that came with thge case cannot be used so I may as well take it out. The 3 pack of LL120's comes with a hub and a node plus. Do I need another hub to control the ML120 fans on the cooler or are they ok where they are? It I have one LL120 at the back of the case. It is just white (because I don't have a controller). Because of the outer rim, it looks wider then the sp120's in the case. Is the cut-out at the front of the case big enough to show the rim? I have 8 vengence rgb pro ram sticks which look awesome. I can see them in iCure so I assume they don't need to connect to anything. My power supply is Seasonic so I guess that there is no way to mintor that. The board is a Gigabyte Gamer Pro 7. Lots of lighting but again, no way to control it. There are two dark areas of the case. One above the power shroud and one at the bottom of the case (to the right of the shroud). I had purchased another cooler which did not fit the case. In my attemt to mod it I made it unreturnable. It was two 140mm ML fans. I was thinking of puttint one on top of the scroud and another at the bottom of the case. Would that work? Thank you for the advise, it is greatly appreciated ! Link to comment Share on other sites More sharing options...
Zotty Posted February 21, 2019 Author Share Posted February 21, 2019 if you are on about the RGB Fan LED Hub? yes you can use that... its the Button controllers you cant use with other Corsair RGB Fan types... lots more info here buddy.. http://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
craigbrown Posted February 27, 2019 Share Posted February 27, 2019 Thanks for all the info! I got my mirror black case almost running. But I have two issues. 1. I need to plug the lighting pro USB into the commander. The plugs are different sizes. Is there an adapter for this? 2. The case lighting no longer works. I broke the speed/lighting control so I need to attach it some other way. I found a cable that fits a fan header, but I don't see a cable to plug into the RGB hub. Thanks! Link to comment Share on other sites More sharing options...
Zotty Posted February 28, 2019 Author Share Posted February 28, 2019 Lighting Node Pro USB is an internal male 9 pin usb header... Commander Pro USB sockets are internal Female 9 pin USB headers.. will fit mate,,, as for the cable between the Commander Pro and the RGB Fan LED Hub,, should get 2 with your commander pro Link to comment Share on other sites More sharing options...
agentweez Posted February 28, 2019 Share Posted February 28, 2019 (edited) Zotty, I think you've already answered my question here, but I just want to understand some specifics, so thank you so much for your time and willingness to answer stuff. I've got a 570x SE and an h150i. I pulled the H150i fans out, and swapped them with the SP120s from the front of the case. (figured it made sense to have static pressure fans there since they are intake for the h150i on the front mount due to size. I also bought some LL120s with the LNP kit and was hoping to figure out a way to talk to all of them via icue/link. When the LL120 kit gets here, will I be able to use the extra hub and the LNP to talk to both the LLs and the SPs on different channels? If yes, can you point me towards which diagram I want to be following? Edit: not super concerned whether the front panel SP buttons work or not, if I can manage all of them via iCue/Link that's totally fine. Edited February 28, 2019 by agentweez Link to comment Share on other sites More sharing options...
Seahawk-X1 Posted February 28, 2019 Share Posted February 28, 2019 (edited) Hy Zotty. I was reading your post, but I dont have it clear at all. http://forum.corsair.com/v3/showthread.php?t=173880 I am building my new PC and I have bought for this case the following componentes: Front Fans: Corsair H150i Pro (replacing the fans with 3 LL120) Up Fans: 2 ML 140 Rear Fan: 1 LL120 Corsair Commander Pro I also have 3 RGB Fan Led Hub. 1 from the case. I'm going to connect 2 of the RGB fan led hub to the Commander Pro and every type of fans to their respective Hub. The issue is with the Corsair Logo. I would like to connect it with the Commander Pro via RGB fan led hub in order to use with iCue software, but I suppose is not posible. Can I connect it directly to the motherboard ? Another possibility ? Thanks in Advance Regards :sunglasse Edited February 28, 2019 by Seahawk-X1 Link to comment Share on other sites More sharing options...
Zotty Posted February 28, 2019 Author Share Posted February 28, 2019 Hi buddy.. No other way to control the Case lighting than with a Lighting node Pro or Commander Pro dude... your other option is to leave those on the Case buttons and control manually.... remember.. the case lighting is technically classed as a single SP RGB Fan.. you cant mix this with other Corsair Fan types 1 Link to comment Share on other sites More sharing options...
Seahawk-X1 Posted February 28, 2019 Share Posted February 28, 2019 Thanks Zotty So if I understand you well I could use a RGB Fan Hub in combination with a Node Pro and connect it directly to the motherboard via usb instead of Commander Pro ? If its possible could be a solution. Otherwise I will use the case buttons as you said before. Thanks again for the help Link to comment Share on other sites More sharing options...
Zotty Posted March 1, 2019 Author Share Posted March 1, 2019 yes you can do that buddy... you just cant mix the Logo's with other none SP RGB fans ;) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now