sangyzan Posted July 13, 2014 Share Posted July 13, 2014 Hello everyone, I would like to start this new project, I have seen on the net and in this forum that there are already many (all fantastic and crazy) but I'd like to have something that occurrence can be closed to make space for another place and maybe even in the wall of the living room where the TV is. Let's start with these pictures, they are not very good at drawing, this is only a draft, during the phase of the project `'ll decide how to proceed. The fixed points are: folding desk fixed to the wall with support for keyboard and mouse attachment. A big thank to all my sponsors who are helping me with this project Specs: Cpu: Intel i7-4790 Motherbord: Asus Maximus VII Impact Vga: ASUS GeForce GTX 750 Ti OC Ram: Kingston HyperX Fury memory 8gb HDD: HyperX 3K SSD 120gb - Pny XLR8 SSD 120gb Psu: Enermax Revolution XT 730W Gold 80 plus Fan: Six Enermax T.B. Apollish Blue Keyboard: Corsair K70 Red tips are welcome, thanks Link to comment Share on other sites More sharing options...
sangyzan Posted July 13, 2014 Author Share Posted July 13, 2014 Hello everyone, today I took the chipboard panels and I cut the most important parts. These will be the supports of the desk.... This panel will set the side fan ...... 3 will be on one side and 3 on the other side this is how it goes on the bottom panel and placed the hardware stay tuned ;) Link to comment Share on other sites More sharing options...
sangyzan Posted July 13, 2014 Author Share Posted July 13, 2014 work continues ........ I cut the holes in the side panels where they will attach the 120mm fans and "probable" radiators this is the magazine of the keyboard and mouse ;-) ;-) Link to comment Share on other sites More sharing options...
sangyzan Posted July 13, 2014 Author Share Posted July 13, 2014 cutting the front panel for keyboard compartment Stay tuned ;-) ;-) Link to comment Share on other sites More sharing options...
sangyzan Posted July 13, 2014 Author Share Posted July 13, 2014 I proceed with the slots dimension 5.25 DVD writer and the other ...... Link to comment Share on other sites More sharing options...
sangyzan Posted July 16, 2014 Author Share Posted July 16, 2014 Hello everyone, I cut the rear panel to support the motherboard and power supply ...... the screws will change ...... temporary power supply Stay Tuned ;-) Link to comment Share on other sites More sharing options...
SickNTired Posted July 16, 2014 Share Posted July 16, 2014 Very interesting build here. Keep them pictures coming! Link to comment Share on other sites More sharing options...
LangZone Posted July 17, 2014 Share Posted July 17, 2014 Saw the cheap psu before I read "Temporary Power Supply" almost died thinking all this work for that haha. Look great so far can't wait to see the finished product. I'd also go with a few monitors vs a tv but that's just me. Link to comment Share on other sites More sharing options...
wytnyt Posted July 17, 2014 Share Posted July 17, 2014 Saw the cheap psu before I read "Temporary Power Supply" almost died thinking all this work for that haha. Look great so far can't wait to see the finished product. I'd also go with a few monitors vs a tv but that's just me. tv's are much bigger and cheaper,,assuming of course you arent a gamer Link to comment Share on other sites More sharing options...
sangyzan Posted July 21, 2014 Author Share Posted July 21, 2014 hello to all, work continues......sorry if some pictures are not visible but the phone sometimes does not work well ;-) Link to comment Share on other sites More sharing options...
sangyzan Posted July 21, 2014 Author Share Posted July 21, 2014 Link to comment Share on other sites More sharing options...
sangyzan Posted July 21, 2014 Author Share Posted July 21, 2014 stay tuned ;-) ps. for those who asked iff I used the tv ....... I prefer it to 3 monitors, I do not see the black bars while gaming or watching a movie ;-) Link to comment Share on other sites More sharing options...
LangZone Posted July 21, 2014 Share Posted July 21, 2014 Looking fantastic. I also appreciate the "screw you brass hinges you're silver now" level of detail. Link to comment Share on other sites More sharing options...
sangyzan Posted July 22, 2014 Author Share Posted July 22, 2014 Looking fantastic. I also appreciate the "screw you brass hinges you're silver now" level of detail. thank you very much ;-) Link to comment Share on other sites More sharing options...
sangyzan Posted July 24, 2014 Author Share Posted July 24, 2014 Cut the top panel to glass mesh for cooling fans and here it is attached to the wall ok guys what do you think? are in half the work. there still so much to do ..... Link to comment Share on other sites More sharing options...
LangZone Posted July 26, 2014 Share Posted July 26, 2014 Looking really clean, especially since it's being cut with hand tools. Can't wait to see more. Corsair you need to sponsor this build. Link to comment Share on other sites More sharing options...
sangyzan Posted July 29, 2014 Author Share Posted July 29, 2014 Looking really clean, especially since it's being cut with hand tools. Can't wait to see more. Corsair you need to sponsor this build. thanks a lot, maybe .... I would very much help .... hope you like it too Corsair Hi guys, a little upgrade ..... I built support for the keybinding and mouse. there is still some finishing and the bottom cap Stay Tuned ;-) Link to comment Share on other sites More sharing options...
sangyzan Posted August 1, 2014 Author Share Posted August 1, 2014 continues with the work, I have finished the top panel. now only missing the glass that comes to me next week. Link to comment Share on other sites More sharing options...
sangyzan Posted August 1, 2014 Author Share Posted August 1, 2014 I built the bottom plug for the keyboard compartment gas pistons to lift the top cover soon with new works ;-) Link to comment Share on other sites More sharing options...
sangyzan Posted August 2, 2014 Author Share Posted August 2, 2014 hello guys, today I built the front panel power button, reset and ignition lights I also added 3 blue LEDs that illuminate the panel at night I created the cover for the wires from the front panel of an old radio ok guys, it's all for the moment .... I hope you enjoy it ;-) Link to comment Share on other sites More sharing options...
sangyzan Posted August 9, 2014 Author Share Posted August 9, 2014 ok guys, some up. I got the double glass is 8mm, and I have siliconized. I inserted the led lights and to test to see what effect it had, the hardware you see is temporary, slowly will buy everything and I will insert ... hope you like it Link to comment Share on other sites More sharing options...
sangyzan Posted August 9, 2014 Author Share Posted August 9, 2014 Link to comment Share on other sites More sharing options...
L3p Posted August 11, 2014 Share Posted August 11, 2014 Really like what you did there, congrats! :) Link to comment Share on other sites More sharing options...
sangyzan Posted August 11, 2014 Author Share Posted August 11, 2014 Really like what you did there, congrats! :) wow, thanks a lot Peter ...... receive compliments from you is an honor ...... your L3P me is was very inspiring .... I hope to get a bit of support because `is very tough ......... thanks again Link to comment Share on other sites More sharing options...
sangyzan Posted August 11, 2014 Author Share Posted August 11, 2014 hello guys, if you like to follow my project this is the page of Fb https://www.facebook.com/EcSYNCDESK?ref_type=bookmark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.