Adzen Posted May 4, 2016 Share Posted May 4, 2016 Hello, Since the last firmware update, I experience a different sensitivity with my Corsair Sabre. It feels like some sort of mouse acceleration. I haven't touched anything in the settings yet my mouse behaves differently. So I tried to decrease my DPI (I was at 1500, now at 1250), but the feeling remains. I tried lower values but it didn't fit me. Now it's not a drastic difference, but enough for me to notice... a little bit annoying. As before the update, "Improve cursor accuracy" is checked, and "prediction" unchecked. Would you have any idea to help it, or maybe downgrade the firmware to the previous version? Anyways, thank you. Link to comment Share on other sites More sharing options...
Faulken Posted May 4, 2016 Share Posted May 4, 2016 same problem here since the firmware update 2.02... mice is "lagging" or stopping randomly when moving. I didnt find old firmware to flash :( Link to comment Share on other sites More sharing options...
Faulken Posted May 4, 2016 Share Posted May 4, 2016 i find a tips, click on reinitialize... then configure sensivity again (if you touched it) back to normal for me Link to comment Share on other sites More sharing options...
Adzen Posted May 4, 2016 Author Share Posted May 4, 2016 Thank you for the suggestion. I have tried but the issue remains. :/ Link to comment Share on other sites More sharing options...
handyarrow Posted March 22, 2017 Share Posted March 22, 2017 same problem here since the firmware update 2.02... mice is "lagging" or stopping randomly when moving. I didnt find old firmware to flash :( Having the same issue here. At first I thought it was the mouse surface, but have tried multiple with the same problems. I'm going to flash on old firmware tonight and see if it helps, but extremely frustrating to say the least. Link to comment Share on other sites More sharing options...
Adzen Posted April 8, 2017 Author Share Posted April 8, 2017 Damn, I thought I was the only one! At least now I know I'm not crazy... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.