toto7 Posted July 16, 2018 Share Posted July 16, 2018 Hello I have 6x LL120 RGB for with a commander pro and the RGB Fan LED Hub. The 6 have worked about 6 month. But for 1 week the last 3 do not want to shine anymore. Channel 4-5 and 6. But if i put fan 4 on channel 3, it lights up quite normal. Have tried it with another Hub but the same problem. My 4 RGB LED strips are working. Can someone help me please Sorry for bad englich Thank you see pics for my config Link to comment Share on other sites More sharing options...
DevBiker Posted July 16, 2018 Share Posted July 16, 2018 Try taking the fan on port 4 and putting it on 3. Take 5 and put it on 4 and 3 goes to 6. What happens? This should help us determine if it's the hub or the fans. Link to comment Share on other sites More sharing options...
toto7 Posted July 16, 2018 Author Share Posted July 16, 2018 Thank you for your prompt reply Yes, it works. That means that my 3 fan is broken. see pic Link to comment Share on other sites More sharing options...
DevBiker Posted July 16, 2018 Share Posted July 16, 2018 Yup, Fan 3 is the issue; it's not "sending" the signal down the chain. Since they work in serial, one bad fan can take the rest out, even if that fan lights up. At this point, you may want to try contact Corsair support for an RMA if you want. Or you can keep it at the end of the chain where it won't muck things up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.