h4mz Posted March 8, 2011 Share Posted March 8, 2011 okay, its hear stupid, but i buy RAM that is maybe not listed by corsair on here.. everybody can help me with my details specs how to configuring and tuning this RAM on my Mobo please.. when i use 2 RAM on slot 0 and 2 its no problem when i use 4 RAM on slot 0-1-2-3 my installed operating system go die (7 ultimate get BSOD), my ubuntu goes freeze i don't know howto and about setting RAM in bios so i need help on this forum BTW my MoBo is not listed on here why ? this MoBo is using DDR3 too Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 8, 2011 Corsair Employee Share Posted March 8, 2011 With 4 modules I would suggest you set the memory frequency at DDR1066 or DDr1333 and set the memory Voltage to 1.7 Volts and see if it will pass http://www.memtest.org. Link to comment Share on other sites More sharing options...
h4mz Posted March 9, 2011 Author Share Posted March 9, 2011 I'll try howto set the bios i will show the result and i will show to u the result too.. but if there any wrong settings please help to suggest me the right settings sorry for my really bad english Link to comment Share on other sites More sharing options...
h4mz Posted March 9, 2011 Author Share Posted March 9, 2011 With 4 modules I would suggest you set the memory frequency at DDR1066 or DDr1333 and set the memory Voltage to 1.7 Volts and see if it will pass http://www.memtest.org. this is my setting, i search on google and find this but this is not work on my board system got freeze and memtest result error MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................: 7X Fine CPU Clock Ratio.....................:.+0.5 CPU Frequency ...........................: 2.5GHz (333x7.5) Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 333Mhz PCI Express Frequency (Mhz) .........: 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: 800mV PCI Express Clock Drive.................: 800mV CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)...................: 0ps DRAM Performance Control Performance Enhance...................: [standard] (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: Auto Memory Frequency (Mhz) ..............: 1066 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ 9 tRCD ................................... 9 tRP'.................................... 9 tRAS.................................... 24 Advanced Timing Control tRRD.......................................... 4 Auto tWTR.......................................... 4 Auto tWR........................................... 8 Auto tRFC.......................................... 60 Auto tRTP.......................................... 4 Auto Command Rate (CMD) ........................... 0 Auto Driving Strength Profiles Driving Strength ............................ Channel A Static tRead Value.........................:8 Auto tRD Phase0 Adjustment...................: 0 Auto tRD Phase1 Adjustment...................:0 Auto tRD Phase2 Adjustment .................:0 Auto tRD Phase3 Adjustment..................:0 Auto Trd2rd(Different Rank)....................:9 Auto Twr2wr(Different Rank)...................:7 Auto Twr2rd(Different Rank)...................:7 Auto Trd2wr(Same/Diff Rank)..................:10 Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps DDR Write Leveling.....................:Auto DDR Write Training.....................:Auto Channel B Static tRead Value.........................:9 Auto tRD Phase0 Adjustment...................:1 Auto tRD Phase1 Adjustment...................:1 Auto tRD Phase2 Adjustment .................:1 Auto tRD Phase3 Adjustment..................:0 Auto Trd2rd(Different Rank)....................:9 Auto Twr2wr(Different Rank)...................:7 Auto Twr2rd(Different Rank)...................:7 Auto Trd2wr(Same/Diff Rank)..................:10 Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps DDR Write Leveling.....................:Auto DDR Write Training.....................:Auto Motherboard Voltage Control Voltage Type.………... Manual CPU CPU Vcore….……….........................:1.2V CPU Termination….......................:1.2V CPU PLL………………….........................:1.550V CPU Reference.………….......................:0.805V MCH/ICH MCH Core……………........................: 1.2V MCH Reference….…….0.760V...........; <<< Auto ICH I/O……………….....1.550V............: <<< Auto ICH Core…………...……1.100V............: <<< Auto DRAM DRAM Voltage ……......................: 1.7V DRAM Termination .…0.750V............: <<< Auto Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: Disabled Virtualization Technology................: Enabled Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 9, 2011 Corsair Employee Share Posted March 9, 2011 t Standard Timing Control CAS Latency Time........................ 9 tRCD ................................... 9 tRP'.................................... 9 tRAS.................................... 24 Advanced Timing Control tRRD.......................................... 4 Auto tWTR.......................................... 4 Auto tWR........................................... 8 Auto tRFC.......................................... 60 Auto tRTP.......................................... 4 Auto Command Rate (CMD) .....................2T MCH/ICH MCH Core……………........................: 1.4V Link to comment Share on other sites More sharing options...
h4mz Posted March 10, 2011 Author Share Posted March 10, 2011 after i update the settings, my box just cannot boot, event in BIOS, so i unplugged 3 power cable 2 from HDD and 1 Optical drive and it is still cannot boot, so i reset the bios finally boot the latest settings when im cannot boot my box is MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................: 7X Fine CPU Clock Ratio.....................:.+0.5 CPU Frequency ...........................: 2.5GHz (333x7.5) Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 333Mhz PCI Express Frequency (Mhz) .........: 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: 800mV PCI Express Clock Drive.................: 800mV CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)...................: 0ps DRAM Performance Control Performance Enhance...................: [standard] (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: Auto Memory Frequency (Mhz) ..............: 1333 ->changed DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ 9 tRCD ................................... 9 tRP'.................................... 9 tRAS.................................... 24 Advanced Timing Control tRRD.......................................... 4 Auto tWTR.......................................... 4 Auto tWR........................................... 8 Auto tRFC.......................................... 60 Auto tRTP.......................................... 4 Auto Command Rate (CMD) ........................... 2 Auto ->changed Driving Strength Profiles Driving Strength ............................ Channel A Static tRead Value.........................:8 Auto tRD Phase0 Adjustment...................: 0 Auto tRD Phase1 Adjustment...................:0 Auto tRD Phase2 Adjustment .................:0 Auto tRD Phase3 Adjustment..................:0 Auto Trd2rd(Different Rank)....................:9 Auto Twr2wr(Different Rank)...................:7 Auto Twr2rd(Different Rank)...................:7 Auto Trd2wr(Same/Diff Rank)..................:10 Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps DDR Write Leveling.....................:Auto DDR Write Training.....................:Auto Channel B Static tRead Value.........................:9 Auto tRD Phase0 Adjustment...................:1 Auto tRD Phase1 Adjustment...................:1 Auto tRD Phase2 Adjustment .................:1 Auto tRD Phase3 Adjustment..................:0 Auto Trd2rd(Different Rank)....................:9 Auto Twr2wr(Different Rank)...................:7 Auto Twr2rd(Different Rank)...................:7 Auto Trd2wr(Same/Diff Rank)..................:10 Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps DDR Write Leveling.....................:Auto DDR Write Training.....................:Auto Motherboard Voltage Control Voltage Type.………... Manual CPU CPU Vcore….……….........................:1.2V CPU Termination….......................:1.2V CPU PLL………………….........................:1.550V CPU Reference.………….......................:0.805V MCH/ICH MCH Core……………........................: 1.4V -> changed MCH Reference….…….0.760V...........; <<< Auto ICH I/O……………….....1.550V............: <<< Auto ICH Core…………...……1.100V............: <<< Auto DRAM DRAM Voltage ……......................: 1.7V DRAM Termination .…0.750V............: <<< Auto Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: Disabled Virtualization Technology................: Enabled now i think im going crazy.. overclocking is fun, but i absolutely have no basic and experience on overclocking the PC. please suggest me the correct settings Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 10, 2011 Corsair Employee Share Posted March 10, 2011 I am sorry but I cannot tell you how to over clock you should go to an over clocking forum for that. But If the system is still not stable try and set the memory frequency at DDR1066. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.