vigge50 Posted November 7, 2013 Share Posted November 7, 2013 Hello I have a Thermalright true spirit 120 and want to mount a sp120 fan on it. Like most other cooler it doesn't have any screw holes so you use some clips to mount the fan. The problem is just that because of the silencing material that is at the holes make it to thick for the clamps to hold the fan. Is it possible to take of the gray material so that I can mount the fan on my cooler without that fan break or do you have any other ideas about how i can mount it? http://i.imgur.com/YMTttn6l.jpg Link to comment Share on other sites More sharing options...
peanutz94 Posted November 7, 2013 Share Posted November 7, 2013 You could try to shave some of the gray material off the side there to get the clearance needed. I would think a razor blade would do the trick Link to comment Share on other sites More sharing options...
vigge50 Posted November 7, 2013 Author Share Posted November 7, 2013 You could try to shave some of the gray material off the side there to get the clearance needed. I would think a razor blade would do the trick Sounds like a good idea but do you think there is a risk that the guaranty would be cancels if a start to brake of the gray material? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.