Gannicius Posted December 20, 2015 Share Posted December 20, 2015 Hey guys, I'm gettin an air 540 in January and was wondering what would beb the best way to lock up and secure it at LAN's? For example would a Kensington lock be usable with the 540? Are there any aftermarket locks that would work? Many thanks Gannicius Link to comment Share on other sites More sharing options...
wytnyt Posted December 21, 2015 Share Posted December 21, 2015 These type of locks only give the illusion of security and will only stop an ''honest'' thief so short answer no they wont really help... Link to comment Share on other sites More sharing options...
Gannicius Posted December 21, 2015 Author Share Posted December 21, 2015 Is there any other ways to lock up the 540? Link to comment Share on other sites More sharing options...
sebastiannielse Posted December 23, 2015 Share Posted December 23, 2015 There is no kensington hole on the Air 540. But I would suggest getting a: K64615US that is a kensington cable that will fit through most holes. Here is how it looks unlocked: http://g04.a.alicdn.com/kf/HTB10iGaHpXXXXXdXXXXq6xXFXXXi/202849227/HTB10iGaHpXXXXXdXXXXq6xXFXXXi.jpg Then you route it through the upper leftmost hole of the 26x4 hole grid above of the IO plate, at the back of chassis, inside the chassis, through one of the cable grommets, and out again on the upper most rightmost hole of the hole grid above the PSU. You MIGHT need to increase the size of 2 of the holes on the chassis, that is easily done with a screwdriver or pliers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.