Ajcrabb Posted September 14, 2018 Share Posted September 14, 2018 hi there i am having troubles with my pc this is my spec:# Case CORSAIR OBSIDIAN SERIES™ 500D FULL TOWER CASE Processor (CPU) AMD Ryzen 7 2700X Eight Core CPU (3.7GHz-4.35GHz/20MB CACHE/AM4) Motherboard ASUS® CROSSHAIR VII HERO (DDR4, 6Gb/s, CrossFireX/SLI) - RGB Ready! Memory (RAM) 16GB Corsair VENGEANCE DDR4 3000MHz (2 x 8GB) Graphics Card 8GB ASUS ROG STRIX GEFORCE GTX 1080 - DVI, HDMI, DP 1st Hard Disk 3TB SATA-III 3.5" HDD, 6GB/s, 7200RPM, 64MB CACHE 1st M.2 SSD Drive 250GB SAMSUNG 970 EVO M.2, PCIe NVMe (up to 3400MB/R, 1500MB/W) Power Supply CORSAIR 550W TXm SERIES™ SEMI-MODULAR 80 PLUS® GOLD, ULTRA QUIET Processor Cooling Corsair H100x Hydro Cooler w/ PCS Liquid Series Ultra Quiet Fans LED Lighting 50cm RGB LED Strip Extra Case Fans 3x Corsair LL120 RGB LED Fan + Controller Kit i load ICUE up and all it says is no device detected this pc was built by pc specialist and i have had it for one day it has a corsair fan controller in it and a node pro from what i can see please help me as i want to change fan speed and rgb coulors of the fans however i cant do that as it says no devices are detected Link to comment Share on other sites More sharing options...
DevBiker Posted September 14, 2018 Share Posted September 14, 2018 You need to check that the cooler and the lighting Node pro are connected to USB headers on your motherboard. Link to comment Share on other sites More sharing options...
Ajcrabb Posted September 14, 2018 Author Share Posted September 14, 2018 You need to check that the cooler and the lighting Node pro are connected to USB headers on your motherboard. okay thanks would this be via 1 single cable or would they both have a cable? is there any particular usb header? thanks Ash Link to comment Share on other sites More sharing options...
Ajcrabb Posted September 14, 2018 Author Share Posted September 14, 2018 You need to check that the cooler and the lighting Node pro are connected to USB headers on your motherboard. just looking in the motherboard booklet would a ADD_HEADER1 or RGB_HEADER1 or USB1112 or USB15 ect. see imagaes below for reference thanks Ash Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.