spudraleigh Posted March 6, 2020 Share Posted March 6, 2020 Hi Guys, I have a wonderful new build that works great. I am attempting to utilize 3 daisy-chained Corsair 10 LED strips. I am connecting them via one extension cable to channel one of my Commander Pro. Channel two is occupied with the cable from Corsair RGB hub for all RGB fans. The problem is, when I do this only the first LED strip lights completely and the second lights only the first two LEDs. I have tried every possible combination of these strips and also new strips with the same behavior. If I connect each strip separately to CP, they work. If two strips are connected directly into CP, the issue with first one lighting and just 2 on 2nd lighting occurs. In iCue, I have channel two set to RGB strips and have tried all quantities of strips with no change. I have also tried to list them as fans of every type with no change. Thanks in advance for any help you can provide! Link to comment Share on other sites More sharing options...
spudraleigh Posted March 6, 2020 Author Share Posted March 6, 2020 SOLVED! I am an idiot! I had the channels on the CP reversed. With fans and strips now indicated in correct ports on CP entered into iCue, all works gr8! Link to comment Share on other sites More sharing options...
Recommended Posts