Wilson1991 Posted December 6, 2013 Share Posted December 6, 2013 just plugged in my brand new h100i and the led is red from the first boot bios comes up with cpu fan error. what could be the problem? Link to comment Share on other sites More sharing options...
wytnyt Posted December 6, 2013 Share Posted December 6, 2013 check to insure your hydro tach wire is connected to the cpu-fan m/b Link to comment Share on other sites More sharing options...
Wilson1991 Posted December 7, 2013 Author Share Posted December 7, 2013 funny thing is that the cable is connected and this still comes up Link to comment Share on other sites More sharing options...
Toasted Posted December 7, 2013 Share Posted December 7, 2013 Go into the BIOS and check your CPU temps. Is it slowly rising? Link to comment Share on other sites More sharing options...
Atashi Posted December 7, 2013 Share Posted December 7, 2013 For the H100i, all you need is the SATA power cable plugged in. It still works fine with everything else unplugged. However, you will lose the ability to monitor the pump or control anything else attached to it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.