Pally1 Posted September 19, 2013 Share Posted September 19, 2013 U used that function described in the manual, that allows you to keep padlock 2 unlocked if you need to use it on multiple systems, but there is nothing on how to close it after your done. So i used it now i cant lock it, how do you lock it? Thanks! Link to comment Share on other sites More sharing options...
Pally1 Posted September 19, 2013 Author Share Posted September 19, 2013 Hello, anyone? Link to comment Share on other sites More sharing options...
Pally1 Posted September 19, 2013 Author Share Posted September 19, 2013 Still waiting for response... FFS this is urgent!!! What kind of a customer support is this!? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 19, 2013 Corsair Employee Share Posted September 19, 2013 "Corsair's Technical Support department is currently open. Their hours of operation are M-F, 7:30 AM to 5:30 PM (Pacific Standard Time)" This is covered under FAQ section: http://www.corsair.com/us/support/faq/usb-drives/ 1. Unlock your Flash Padlock using the directions above 2. Once the drive is unlocked and the Green LED on the drive is blinking, press and hold the KEY button for 3 seconds. (Both red and green LEDs will illuminate) 3. Release KEY button 4. Press and release KEY button (Both red and green LEDs will blink in unison) 5. Press and release KEY button (Green LED will blink) Link to comment Share on other sites More sharing options...
Pally1 Posted September 19, 2013 Author Share Posted September 19, 2013 "Corsair's Technical Support department is currently open. Their hours of operation are M-F, 7:30 AM to 5:30 PM (Pacific Standard Time)" This is covered under FAQ section: http://www.corsair.com/us/support/faq/usb-drives/ 1. Unlock your Flash Padlock using the directions above 2. Once the drive is unlocked and the Green LED on the drive is blinking, press and hold the KEY button for 3 seconds. (Both red and green LEDs will illuminate) 3. Release KEY button 4. Press and release KEY button (Both red and green LEDs will blink in unison) 5. Press and release KEY button (Green LED will blink) Yes, thats how you keep it unlocked and thats what i described. My question is How do you lock it again after this procedure? It stays open... Link to comment Share on other sites More sharing options...
Administrators Technobeard Posted September 19, 2013 Administrators Share Posted September 19, 2013 Please read the FAQ. It states: Q: How do I lock my Flash Padlock? A: Remove your Flash Padlock from the USB port. (LEDs will turn off) In addition, the forum is not an instant chat system. If you have a time sensitive question I would recommend calling us directly within our hours of operation: http://www.corsair.com/us/company/contact/ Link to comment Share on other sites More sharing options...
Pally1 Posted September 20, 2013 Author Share Posted September 20, 2013 Please read the FAQ. It states: In addition, the forum is not an instant chat system. If you have a time sensitive question I would recommend calling us directly within our hours of operation: http://www.corsair.com/us/company/contact/ That is incorrect Afte yo udo this procedure: 1. Unlock your Flash Padlock using the directions above 2. Once the drive is unlocked and the Green LED on the drive is blinking, press and hold the KEY button for 3 seconds. (Both red and green LEDs will illuminate) 3. Release KEY button 4. Press and release KEY button (Both red and green LEDs will blink in unison) 5. Press and release KEY button (Green LED will blink) Flash drive will no longer lock itself upon removal, but stays unlocked forever, and does not require any code entering. Is there any way to lock it again without going through the whole new key setting process? PS I cant call your customer support due to the fact that i live in Mordor. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 26, 2013 Corsair Employee Share Posted September 26, 2013 There's no other way. You need to re-do the user pin setup, plug it in to USB port, and remove it. The drive will be locked after the removal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.